28360

JRC Radar2000 Manual

43
Zoom out
Zoom in
Previous page
1/54
Next page
36 OPERATION
SART Code
Position of SART
Other Ships
Land
Position of the
Rescue Craft
4.28 DISPLAY OF RADAR TRANSPONDER
SART (Search and Rescur Radar Transponder) is life preserving device ap-
proved by GMDSS which is used for locating survivors in the event of a disas-
ter or distress. SART operates in the 9 GHz frequency band. When it receives a
radar signal (interrogating radio wave) of 9 GHz transmitted by a rescue ship or
aircraft radar, SART transmits a series of respouse signals to the searchers to
indicate the distress position.
In order to see the SART or radar beacon mark on the radar screen.
① RANGE SCALE : Select 6 or 12 nm.
② STC : Set to minimum.
③ TUNE : DETUNED to reduce the clutter.
④ IR : Set IR OFF.
[EXAMPLE]
When above settings ① to ④ are made to display SART signals, objects around the own
ship will not appear on the radar screen, so perform thorough visual monitoring of the sea
area around the own ship to avoid any collision or stranding.
Further, when more than one radar systems are mounted, while using a 9 GHz band radar
for searching SART signals, be sure to use another radar as an ordinary radar to perform
monitoring of objects around the own ship to avoid any collision, check of the position of
the own ship to avoid any stranding, and so on.
Need to retune the set for normal operation on completeion.
Attention
36 OPERATION
SART Code
Position of SART
Other Ships
Land
Position of the
Rescue Craft
4.28 DISPLAY OF RADAR TRANSPONDER
SART (Search and Rescur Radar Transponder) is life preserving device ap-
proved by GMDSS which is used for locating survivors in the event of a disas-
ter or distress. SART operates in the 9 GHz frequency band. When it receives a
radar signal (interrogating radio wave) of 9 GHz transmitted by a rescue ship or
aircraft radar, SART transmits a series of respouse signals to the searchers to
indicate the distress position.
In order to see the SART or radar beacon mark on the radar screen.
① RANGE SCALE : Select 6 or 12 nm.
② STC : Set to minimum.
③ TUNE : DETUNED to reduce the clutter.
④ IR : Set IR OFF.
[EXAMPLE]
When above settings ① to ④ are made to display SART signals, objects around the own
ship will not appear on the radar screen, so perform thorough visual monitoring of the sea
area around the own ship to avoid any collision or stranding.
Further, when more than one radar systems are mounted, while using a 9 GHz band radar
for searching SART signals, be sure to use another radar as an ordinary radar to perform
monitoring of objects around the own ship to avoid any collision, check of the position of
the own ship to avoid any stranding, and so on.
Need to retune the set for normal operation on completeion.
Attention
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info