28360

JRC Radar2000 Manual

35
Zoom out
Zoom in
Previous page
1/54
Next page
28
4.24 SETTING AUTO/MANUAL TUNING
The tuning control can be selected either automatically or manually. If the manual
tuning control is selected, the tuning bar indicator is present. The auto tune
mode will automatically tune the radar for optimum reception whenever the
radar is turned on, even if ranges changed.
4.25 IN CASE AN UNUSUAL CONDITION OCCURS
DURING OPERATION
If the operator encounters unusual conditions, such as:--
・ The screen is disturbed.
・ The machine accepts no key input.
While manipulating, initialize RADAR 2000 by following the steps given be-
low.
(a) Press the STBY/OFF and X-MIT/OFF keys simultaneously.
The RADAR 2000 is turned off.
(b) Press the EBL/VRM and STBY/OFF keys simultaneously.
All settings except the initial settings established through the “INITIAL
SETTING” menu are reset to their factory-set values.
4.26 LANGUAGE
The radar menu can be displayed in one of six languages. They are English,
Spanish, French, German, Norwegian and Italian. After selecting any language,
the menu and the oper. prompts will also change to that language. A master
reset will return the display setting to English.
① Press the JOYSTICK.
② Select the “LANGUAGE” from the “RADAR SET-UP” menu.
③ Select desired language.
④ Press the JOYSTICK to exit the language setting mode.
OPERATION
28
4.24 SETTING AUTO/MANUAL TUNING
The tuning control can be selected either automatically or manually. If the manual
tuning control is selected, the tuning bar indicator is present. The auto tune
mode will automatically tune the radar for optimum reception whenever the
radar is turned on, even if ranges changed.
4.25 IN CASE AN UNUSUAL CONDITION OCCURS
DURING OPERATION
If the operator encounters unusual conditions, such as:--
・ The screen is disturbed.
・ The machine accepts no key input.
While manipulating, initialize RADAR 2000 by following the steps given be-
low.
(a) Press the STBY/OFF and X-MIT/OFF keys simultaneously.
The RADAR 2000 is turned off.
(b) Press the EBL/VRM and STBY/OFF keys simultaneously.
All settings except the initial settings established through the “INITIAL
SETTING” menu are reset to their factory-set values.
4.26 LANGUAGE
The radar menu can be displayed in one of six languages. They are English,
Spanish, French, German, Norwegian and Italian. After selecting any language,
the menu and the oper. prompts will also change to that language. A master
reset will return the display setting to English.
① Press the JOYSTICK.
② Select the “LANGUAGE” from the “RADAR SET-UP” menu.
③ Select desired language.
④ Press the JOYSTICK to exit the language setting mode.
OPERATION
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info