28360
28
Zoom out
Zoom in
Previous page
1/54
Next page
21
4.3 SELECTING A RANGE
The actual range scale and range rings interval is shown in the upper left corner
of the display. Press the RANGE key for an increased range scale, or key
for a decreases range scale. The selected range automatically determines the
proper number and distance between the range rings.
4.4 ADJUSTING RECEIVER SENSITIVITY
Press the J-DIAL until GAIN appears highlighted on the upper right corner of
the display. Rotate the J-DIAL clockwise or counterclockwise, to vary the gain
and thus control the strength of echo returns on the radar screen. An on-screen
bar indicates the gain level selected for display. The proper setting is when the
background noise is just visible on the screen.
4.5 ADJUSTING TUNING
The RADAR 2000 is setting Auto Tune mode at the power ON. If wish to
manual tuning, required to select Manual Tune mode by using menu (Refer to
4.27).
Press the J-DIAL until the TUNE appears highlighted on the upper right corner
of the display. Rotate the J-DIAL clockwise or counterclockwise, to maximize
the target echo. If land targets are not within the radar’s range, adjust the control
for maximum sea clutter. The on-screen tuning indicator will shown the strength
of tuning peak conditions is turned for maximum deflection. Normally, tuning
is performed on the 3 NM range scale or higher. Minor readjustment may be
necessary after the radar has warmed up 10 minutes.
OPERATION
21
4.3 SELECTING A RANGE
The actual range scale and range rings interval is shown in the upper left corner
of the display. Press the RANGE key for an increased range scale, or key
for a decreases range scale. The selected range automatically determines the
proper number and distance between the range rings.
4.4 ADJUSTING RECEIVER SENSITIVITY
Press the J-DIAL until GAIN appears highlighted on the upper right corner of
the display. Rotate the J-DIAL clockwise or counterclockwise, to vary the gain
and thus control the strength of echo returns on the radar screen. An on-screen
bar indicates the gain level selected for display. The proper setting is when the
background noise is just visible on the screen.
4.5 ADJUSTING TUNING
The RADAR 2000 is setting Auto Tune mode at the power ON. If wish to
manual tuning, required to select Manual Tune mode by using menu (Refer to
4.27).
Press the J-DIAL until the TUNE appears highlighted on the upper right corner
of the display. Rotate the J-DIAL clockwise or counterclockwise, to maximize
the target echo. If land targets are not within the radar’s range, adjust the control
for maximum sea clutter. The on-screen tuning indicator will shown the strength
of tuning peak conditions is turned for maximum deflection. Normally, tuning
is performed on the 3 NM range scale or higher. Minor readjustment may be
necessary after the radar has warmed up 10 minutes.
OPERATION
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info