28360
24
Zoom out
Zoom in
Previous page
1/54
Next page
17
3.7.5 TUNE PRESET
The tune preset is pre adjusted at the factory for proper operation. Normally
further adjustment is not required. If after about 10 minutes of transmit, the
tune bar is oriented towards one end or its range for video peak, perform the
following steps:
Set the range scale to 3 NM.
Set the gain control to desired level.
Set the SEA, RAIN and IR to Off.
Press and hold the JOYSTICK for the initial setting menu.
Select TUNE PRESET by using the JOYSTICK, and press the JOYSTICK.
Adjust using the J-DIAL to maximum targets on the screen.
Press the JOYSTICK when maximum targets are set.
3.7.6 STC PRESET
The STC preset is adjusted at the factory for proper operation. Normally fur-
ther adjustment is not required.
Set Range to 6 NM.
Set the Gain to maximum (Refer to Section 4.4).
Press and hold the JOYSTICK for the initial setting menu.
Select STC PRESET by using the JOYSTICK, and press the JOYSTICK.
Adjust distance so that no background noise appears in range of 0 to 2 NM
by using the J-DIAL.
Press the JOYSTICK to end the STC PRESET mode.
3.7.7 BUZZER VOLUME
At the time of shipment, the Buzzer sound has been set to maximum position.
When it is necessary to lower the volume.
In the initial setting menu select BUZZER.
Adjust the suitable buzzer sound level using the J-DIAL.
Press the JOYSTICK to end the buzzer setting mode.
INSTALLATION
17
3.7.5 TUNE PRESET
The tune preset is pre adjusted at the factory for proper operation. Normally
further adjustment is not required. If after about 10 minutes of transmit, the
tune bar is oriented towards one end or its range for video peak, perform the
following steps:
Set the range scale to 3 NM.
Set the gain control to desired level.
Set the SEA, RAIN and IR to Off.
Press and hold the JOYSTICK for the initial setting menu.
Select TUNE PRESET by using the JOYSTICK, and press the JOYSTICK.
Adjust using the J-DIAL to maximum targets on the screen.
Press the JOYSTICK when maximum targets are set.
3.7.6 STC PRESET
The STC preset is adjusted at the factory for proper operation. Normally fur-
ther adjustment is not required.
Set Range to 6 NM.
Set the Gain to maximum (Refer to Section 4.4).
Press and hold the JOYSTICK for the initial setting menu.
Select STC PRESET by using the JOYSTICK, and press the JOYSTICK.
Adjust distance so that no background noise appears in range of 0 to 2 NM
by using the J-DIAL.
Press the JOYSTICK to end the STC PRESET mode.
3.7.7 BUZZER VOLUME
At the time of shipment, the Buzzer sound has been set to maximum position.
When it is necessary to lower the volume.
In the initial setting menu select BUZZER.
Adjust the suitable buzzer sound level using the J-DIAL.
Press the JOYSTICK to end the buzzer setting mode.
INSTALLATION
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info