28360
3
Zoom out
Zoom in
Previous page
1/54
Next page
II
Operating Precautions
To avoid electrical shock, never touch the inside of the scanner or
display unit. Leave protective cover on.
High voltage present inside of these units could cause personal injury.
Refer equipment servicing to authorized JRC personnel.
Avoid routinely entering the nearby vicinity of the scanner unit.
The scanner unit rotates quickly and could cause personal injury. The
scanner should be installed in a high place such as the cabin roof,
flying bridge, radar mast, or the top base frame of your ship. If the
scanner cannot be located out of normal human reach, it should be
surrounded with a fence. Prolonged human exposure to radar signals
at close range is not recommended.
Before approaching or removing the scanner unit, turn off the STBY/
OFF and X-MIT/OFF keys on the display unit. Cable connector P1 on
the display unit should be disconnected before removing the scanner
unit from its installed position.
Never sit on the scanner unit.
The radome and/or the parts in the scanner unit may be damaged.
Use your RADAR 2000 system properly by following the instructions
in this manual.
Incorrect operation can detract from optimum system performance.
This radar unit is only an aid to navigation. Its accuracy can be af-
fected by many factors including equipment failure or defects, envi-
ronmental conditions, and improper handling or use. It is the user’s
responsibility to exercise common prudence and navigational judge-
ment. This radar unit should not be relied upon as a substitute for such
prudence and judgment.
WARNING
CAUTION
II
Operating Precautions
To avoid electrical shock, never touch the inside of the scanner or
display unit. Leave protective cover on.
High voltage present inside of these units could cause personal injury.
Refer equipment servicing to authorized JRC personnel.
Avoid routinely entering the nearby vicinity of the scanner unit.
The scanner unit rotates quickly and could cause personal injury. The
scanner should be installed in a high place such as the cabin roof,
flying bridge, radar mast, or the top base frame of your ship. If the
scanner cannot be located out of normal human reach, it should be
surrounded with a fence. Prolonged human exposure to radar signals
at close range is not recommended.
Before approaching or removing the scanner unit, turn off the STBY/
OFF and X-MIT/OFF keys on the display unit. Cable connector P1 on
the display unit should be disconnected before removing the scanner
unit from its installed position.
Never sit on the scanner unit.
The radome and/or the parts in the scanner unit may be damaged.
Use your RADAR 2000 system properly by following the instructions
in this manual.
Incorrect operation can detract from optimum system performance.
This radar unit is only an aid to navigation. Its accuracy can be af-
fected by many factors including equipment failure or defects, envi-
ronmental conditions, and improper handling or use. It is the user’s
responsibility to exercise common prudence and navigational judge-
ment. This radar unit should not be relied upon as a substitute for such
prudence and judgment.
WARNING
CAUTION
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info