28356
110
Zoom out
Zoom in
Previous page
1/148
Next page
109
Section 3 Operation
SELF TEST
ROM
SRAM
DRAM
RD ROM
CARD-1
CARD-2
RS232C
RD SRAM OK
RD DRAM OK
TUNEINPUT DATA
GPS INPUT DATA
NMEA INPUT DATA
“MENU”KEY:SWITCH TO DISP.TEST
POWER OFF:EXIT SELF TEST
Rx.xx
OK
OK
Rx.xx
OPEN
OPEN
MOB MENU
Lxxx Rxxx
RANGE
NAV
EBL MODE
BRT CENT
STBY TX
Self Test Operation
•The RADAR 1800 has a built-in self test function with which you
can check the operating status of the RADAR 1800 automatically.
Also a function of monitoring input NMEA0183 formatted sentences
is attached to the self test function, and you can easily check various
data input from external equipment.
•The self test function has the following four functions.
Internal checking function:
Checks DPU and shows OK or NG as the result.
Input data monitoring function:
Displays various input data including GPS/DGPS sensor and
NMEA0183 sentences on the screen.
Panel checking function:
Displays the status of the panel key that has been pushed.
Display checking function:
Displays test patterns such as character font or color pattern.
•When you push
STBY/OFF
STBY/OFF
to turn the power on while pushing
BR
BR
T/CLR
T/CLR
and
CENTER
CENTER
at the same time, the RADAR 1800 enters the
SELF TEST mode and the SELF TEST display appears. Then ROM
and RAM are checked automatically and various data as well as the
result (OK or NG) appear. Push any panel key to change the
corresponding indicator from red to blue on the screen. When all
indicators change to blue, the panel check is completed. After the
panel check is completed, push
BR
BR
T/CLR
T/CLR
to pause the input data
display temporarily. Push
BR
BR
T/CLR
T/CLR
again to resume the display. When
you want to check the NMEA0183 input sentences, stop the display
with this procedure to make checking easier. Push
MENU
MENU
to switch
the display to test pattern. Each time you push
MENU
MENU
, the test
pattern changes as long as the power is on.
•Turn the power off to end the self test.
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info