28356
98
Zoom out
Zoom in
Previous page
1/148
Next page
97
Section 3 Operation
INSTALLATION
•This menu includes various settings required for installation, such as
the selection of the external data input method and unit, or the initial
setting of the GPS/DGPS antenna. After installing the RADAR 1800,
use this menu to make your settings.
SIMULATION (Turning the simulator ON/OFF)
•In this menu, you can turn on or off the simulator.
•The simulator provides navigation information such as radar echo,
vessel position, vessel speed, course using the dummy data stored
initially in the RADAR 1800. While the simulator is activated, you
can simulate almost all operations except the operation of the
INSTALLATION menu and radar control.
INITIAL POSITION (Setting the standard position of
the chart display)
•In this menu, you can set the standard position of the chart display
when no navigation aid is connected.
CLOCK ADJUST (Adjusting the date and time)
•In this menu, you can adjust the date and time displayed on the
screen.
DATE & TIME (Selecting a system of time)
•In this menu, you can select 12-hour or 24-hour system and display
OFF.
RADAR ADJUST (Adjusting the radar)
•In this menu, you can set operation condition and adjust the tuning,
the relative alignment, and the display timing of RADAR 1800.
[EBL BEARING]
•You can select the EBL bearing reading relative or true.
(Refer to “Bearing Measurement” p.60)
OFF
N 0° 00.000’
E 0° 00.000’
00/00/0000
00:00
12HOUR
SIMULATION
INITIAL POS.
CLOCK ADJUST
DATE & TIME
RADAR ADJUST>
DATA IN/OUT >
UNITS >
CALIBRATION >
OPERATION >
INSTALLATION
EBL BEARING
PRF SHIFT
BEARING
DISPLAY TIMING
TUNE PRESET
STC PRESET
RADAR ADJUST
REL
20
0
561
32
57
EBL BEARING
REL TRUE
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info