28356
62
Zoom out
Zoom in
Previous page
1/148
Next page
61
Section 3 Operation
RADAR Operating Menu
•Press
MENU
MENU
, select the “RADAR SETTING>” and push the
Joystick
, the “RADAR SETTING” menu is displayed.
RINGS
The fixed rings are used to estimate the distances to the targets.
The interval between range rings is displayed at the upper left of the
screen just below the range scale indicator.
The range rings can be turned to on or off via this menu.
•Select the “RINGS” in RADAR SETTING menu and push the
Joystick
, the “RINGS” pull-down menu is displayed. Change
settings to ON/OFF by
Joystick
right or left and push
Joystick
.
DISPLAY MODE (BEARING)
There are three bearing modes.
[HUP]
Most radar operators are familiar with seeing the radar picture aligned
with the bow of the vessel. This type of radar display orientation makes
it easy to look out the windshield and identify the radars targets as they
are positioned relative to the ships Heading line.
[NUP]
North up mode means the radar picture is positioned just like your
marine chart. 000˚ on the radar bearing scale is the same as True or
Magnetic North.
This mode requires an appropriate Heading input via COMPASS input
or NMEA input.
[CUP]
If having the radar picture turned around on the screen in the NUP
mode is confusing, you could select the CUP mode. The CUP mode
lets you rotate the radar picture so the vessel’s basic Course Heading
(and the Heading line) point at 000˚ on the bearing scale, similar to the
HUP mode. In CUP mode you can again reference the targets by
looking out the front window.
Note however, if the vessel changes direction, the radar picture will not
shift on the radar display in sync with the ships Heading changes. This
keeps all target plots stable and also provides a clear visual reference to
the operator on the impact of the vessel’s Heading shifts to the targets
around his vessel.
This mode requires an appropriate Heading input via COMPASS input
or NMEA input.
BEARING
HUP
NUP
CUP
CUP RESET
RINGS
OFF ON
ON
HUP
ON
MANUAL
AUTO
OFF
OFF
OFF
OFF
OFF
RINGS
BEARING
INTERFERENCE
SEA
TUNE
EXPANDER
PROCESS
TRAILS
CLEAR TRAILS
TX-PLAN >
WAYPOINT
COLOR >
RADAR SETTING
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info