28352
42
Zoom out
Zoom in
Previous page
1/49
Next page
35
(2) Check for any evidence of corrosion in the scanner unit and display unit,
or their cables and connecotrs. Clean as required.
(3) Check that the cable connector is secure.
5.2 CLEANING (MONTHLY INTERVALS)
Wash the exterior of the scanner with fresh water, but do not immerse the unit.
A heavy deposit of dirt, or caked salt on the surface of the scanner may cause a
considerable drop in the radar performance. Clean the face of the display unit
with a clean, soft, lint-free cloth, slightly dampened with fresh water.
5.3 LCD FILTER SURFACE CLEANING
In time, the surface of the LCD FILTER (screen) may accumulate a film of
contaminants, which tend to dim the picture. A good glass cleaner and a soft
cloth or towel can be used to clean the LCD display, the keyboard and the
display cabinet.
5.4 FUSE
A fuse seldom blows without some cause. Even if a fuse is replaced and it does
not immediately blow again, it may still be necessary to make further checks on
its associated circuits. If necessary, replace the 5A fuse (Normal-brow type) in
the power cable.
MAINTENANCE
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1000_MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1000_MKII in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info