28346
84
Zoom out
Zoom in
Previous page
1/404
Next page
3-12
3.3 PREPARATION
Tuning [TUNE]・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
This control is used to tune the receiver.
If the receiver is detuned from the best level, the receiving sensitivity falls, and the targets on a long
range or the small targets on a short range may be overlooked.
In manual tuning, rotate the [TUNE] control clockwise or anticlockwise and adjust so that the target
echoes are the clearest. If no suitable target is present, adjust the control so that the tuning
indicator bar graph at the upper left of the radar display is maximized.
After setting the radar to the TRANSMIT mode, it take about 10 minutes until the oscillation
frequency of the magnetron is stabilized. Therefore, tune the receiver once again after about 10
minutes.
For automatic tuning, set “TUNE” to “ON” in the AUTO Menu. (Refer to page 3-8).
Sensitivity Control [GAIN]・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
This control is used to control the radar receiving sensitivity.
Clockwise rotation of the [GAIN] control increases receiving sensitivity and extends the radar
observation range. If the sensitivity is too high, the receiver noise will increase to reduce the
contrast of the targets with the background video and make the targets obscure on the display. To
observe densely crowded targets or the targets on a short range, rotate the [GAIN] control
anticlockwise to reduce the sensitivity so that the targets are easy to observe. Be careful not to
overlook small and important targets.
Display Brilliance Control ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
This control is used to adjust the brilliance of the entire display.
Clockwise rotation of the [BRILL] control increases the brilliance of the entire display. Adjust the
[BRILL] control to obtain the best-to-see display with optimum brilliance.
TUNE
GAIN
84


Need help? Post your question in this forum.

Forumrules
1

Forum

jrc-jma9932sa

Reset search

  • HOW TO CLEAR MTR(FAN) ALARM IN JRC RADAR -9932 SA Submitted on 20-4-2022 at 21:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA9932SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA9932SA in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info