28346
63
Zoom out
Zoom in
Previous page
1/404
Next page
2-3
2
[POWER] (Power Supply) Switch
This switch is used to turn the power on and off. The lamp lights when this switch is on.
When the power is on and it cannot be turned off for some reason, depressing this switch for five
seconds will force the power off.
[PWR ACK] (Power Alarm Acknowledgment) Switch
When this switch is set to ON, the lamp lights to start the system.
In order for this key to work, an external battery is required (normally a power supply separate
from the AC unit).
[TX/STBY] (Operation) Switch
TheSTANDBY will appear at the upper left of the radar display about 3 minutes after
the [PWR] switch is set to ON. Then, press this switch, and transmission will be started.
Pressing the switch during transmission sets the equipment to the standby state.
[ALARM ACK] (Alarm Acknowledgment) Switch
Press this switch to acknowledge a failure, approach of a target, or collision alarm.
[TUNE] (Turning) Control
Tunes the target signals to display the targets most clearly on the radar display.
Switching between AUTO and MANUAL can be done by pressing the knob.
[RAIN] (Rain/Snow Clutter Suppression) Control
Reduces the clutter echo caused by rain and snow.
Be careful not to set this adjustment too high. Setting this adjustment too high may cause the
target to be erased. Switching between AUTO and MANUAL can be done by pressing the knob.
[SEA] (Sea Clutter Suppression) Control
Reduces the clutter echo caused by the surface of the sea.
Be careful not to set this adjustment too high. Setting this adjustment too high may cause the
target to be erased. Switching between AUTO and MANUAL can be done by pressing the knob.
[GAIN] (Receiving Sensitivity) Control
Controls the radar receiving sensitivity.
Adjust the GAIN to a point where the background static does not interfere with operation.
[RANGE +/-] (Range Scale Select) Switch
Selects a range scale from 0.125 to 96 (or 120) nautical miles.
[EBL1] (Electric Bearing Line 1) Switch
Selects and displays EBL1. Switches between ON and OFF, and the function for which this
switch if valid. When depressed for two seconds or longer, this switch selects ON/OFF for the
floating setting.
[EBL2] (Electric Bearing Line 2) Switch
Selects and displays EBL2. Switches between ON and OFF, and the function for which this
switch if valid. When depressed for two seconds or longer, this switch selects ON/OFF for the
floating setting.
[EBL] (Electric Bearing Line) Control
Rotates the bearing of the EBL that is selected by EBL1 and 2.
[VRM1] (Variable Range Marker 1) Switch
63


Need help? Post your question in this forum.

Forumrules
1

Forum

jrc-jma9932sa

Reset search

  • HOW TO CLEAR MTR(FAN) ALARM IN JRC RADAR -9932 SA Submitted on 20-4-2022 at 21:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA9932SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA9932SA in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info