28307

JRC JMA2343 Manual

275
Zoom out
Zoom in
Previous page
1/310
Next page
259
9.8.11 GPS/DGPS
1. Initial setting of GPS
1. Initial setting of GPS1. Initial setting of GPS
1. Initial setting of GPS
This operation is for undertaking initial setting of GPS. The GPS receiver measures posi-
tion without initial setting but 10 or more minutes may be required after initial setting.
● Content of settings
Ship position : Approximate latitude and longitude is sufficient
Exclusion satellite : When unhealth satellite is used, precision may deteriorate.
The satellite number input here is not used for measuring the
position.
Geodetic system : Japan is "02"
Antenna height : Input the height of the antenna from the sea surface.
Fix mode : Since the height of the antenna is fix in the case of an ocean
going vessel, greater stability in position is obtained in 2D (two
dimensions).
DOP level : If only position results with high precision are intended to be
used, designate 10 or less or 5 or less.
Position average :
When variance in position needs to be minimized, select
ＬＯＮＧ
ＬＯＮＧＬＯＮＧ
ＬＯＮＧ
.
When response needs to be maximized select
ＮＯＮＥ
ＮＯＮＥＮＯＮＥ
ＮＯＮＥ
. However,
with this latter setting, variance will increase.
(a) Select "GPS" in the line "GPS PRESET" - the menu "INITIAL SETTING 1".
The menu "GPS" will be displayed.
(b)
Select the items in the cross key and change the set value using the
ＲＡＮＧＥ
ＲＡＮＧＥＲＡＮＧＥ
ＲＡＮＧＥ
key.
In order to change the ship's "N/S" or "E/W" position using the left and right keys
of the cross key.
(c) Push the
ＥＮＴＥＲ
ＥＮＴＥＲＥＮＴＥＲ
ＥＮＴＥＲ
key.
The setting has been determined.
(d) Select "SEND DATA" in the menu "GPS".
The GPS setting will be implemented.
2. Initial setting of DGPS
2. Initial setting of DGPS2. Initial setting of DGPS
2. Initial setting of DGPS
In the event high precision position determination is intended using DGPS, it is nec-
essary to set the beacon receiver.
… 275 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA2343 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA2343 in the language / languages: English as an attachment in your email.

The manual is 17,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info