28307
197
Zoom out
Zoom in
Previous page
1/310
Next page
181
3.3.15 Using the parallel line cursor
The parallel line cursor function is set to #1EBL and #1VRM
The parallel line cursor function is set to #1EBL and #1VRMThe parallel line cursor function is set to #1EBL and #1VRM
The parallel line cursor function is set to #1EBL and #1VRM
(a)
Select "PLINE 1" or "PLINE 2" in the line "EBL1/VRM1" - the menu "FUNCTION".
When setting to PLINE 1, the parallel line cursor is displayed in half circumference.
When setting to PLINE 2, the parallel line cursor is displayed in a full circumference.
Operating the parallel line cursor
Operating the parallel line cursorOperating the parallel line cursor
Operating the parallel line cursor
(a) Push the EBL
EBLEBL
EBL key or the VRM
VRMVRM
VRM key.
Depending on the setting at the line "EBL1/EBL2" of the menu "FUNCTION", the
parallel line cursor will be displayed in a half circumference or full circumference.
However, it is necessary to set #1EBL or #1VRM to operational mode using the
cross key.
(b) Set the bearing and interval of the parallel line cursor by operating the cross key
in the up-down and left-right directions.
When the upper portion of the cross key is pushed, the interval increases.
When the lower portion of the cross key is pushed, the interval decreases.
When the left side of the cross key is pushed, the parallel cursor turns in the
counterclockwise direction.
When the right side of the cross key is pushed, the parallel cursor turns in the
clockwise direction.
Canceling the parallel line cursor
Canceling the parallel line cursorCanceling the parallel line cursor
Canceling the parallel line cursor
(a) Select "FIX" in the line "EBL1/VRM1" - the menu "FUNCTION".
The parallel line cursor display is canceled and use of normal #1EBL and #1VRM
will be enabled.
3.3.16 Switching the EBL and cursor bearing display among relative, true and
magnetic bearing display mode
There are three methods of displaying the bearing using EBL and the cursor.
Relative bearing display:
This is the bearing of an EBL or cursor displayed with the bearing of the ship's
bow (ship's heading marker) taken as 0 degrees.
True bearing display
(Note)
:
This is the bearing of an EBL or cursor displayed with the bearing of true north
(north pole) taken as 0 degrees.
197


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA2343 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA2343 in the language / languages: English as an attachment in your email.

The manual is 17,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info