634646
31
Zoom out
Zoom in
Previous page
1/32
Next page
ENTER TRAINING MODE
When enter into training mde, MANUAL(MAN) flash 1Hz in the dot matrix. Press UP& DOWN to
choose from
MANUALPROGRAMUser programH.R.CWATT. Press ENTER/MODE to enter the
mode. If press START without selection, directly enter into MANUAL MODE and start.
PROGRAM SETTING
In STOP mode, press P1, P2, P3, ~, P12 to enter relevant program accordingly quickly. Or in
the START mode, Select the program under training mode, press UP&DOWN to choose one
from P0, P02, P03, ~, P12.
PROGRAM SETTING LEVEL
Adjust the level in start mode. When using / to adjust, cannot recycle the level(can only
increase to Level32, can only decrease to 1).
ADJUSTING MANUAL LEVEL
Adjust the manual level in start mode. Press
/ to increase or decrease one level. If hold on
for 1.5s, will +/- 2levels per second and stop when releasing.
ADJUST THE VALUE (Eg. TIME, DISTANCE, CALORIES, PULSE etc.)
I. Select TIME, DISTANCE, CALORIES, PULSE in Manual mode. Use
/ to adjust the value
Recyclely.
II. When in PROGRAM, User program, H.R.C, WATT mode, only can set the time.
II. Use
▲/▼ to increase or decrease one level; Press ▲/▼ for 1.5s, +/
- 8 levels per second and
Stop when releasing.
H.R.C
If select H.R.C mode, need set age first and confirm by MODE. It will display preset value in
PULSE area according to age. If select TARGET, it will display 100 and flash in PULSE area.
Use / to adjust the target value(30~230) and can be recycle.
User Program
In User PROGRAM mode, user may press
/ to select program drawing
each timer shift
corresponding Level value), display and flash in the inserted drawing. It will light after setting.
When setting, the figures and Letters in LOAD Window displaying to be set. LOAD value flash
at 1Hz. Press mode to confirm the value after setting. A complete PROGRAM drawing timer shift
has 20 steps need to be set. Then it will run as the set program. When come to 9
th
step, it scroll
and shift to lest and so on. If you want to pause the program halfway, press mode 2s. The unset
timer shift will save last time value.
WATT
When entering, the WATT value is flashing to be set(preset value=120). User press /to set
WATT value. After Starting, it will adjust automatically according to the WATT value user inserted
and exercise status.
SLEEP MODE
No signal(SENSOR, KEYBOARD, PULSE value display) input over 4 minutes, system will enter
SLEEP MODE. All set and calculated value will be saved. When power on and start next time, it
will go on with the calculated value.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joy Sport C60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joy Sport C60 in the language / languages: Dutch as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info