467791
19
Zoom out
Zoom in
Previous page
1/108
Next page
19
Fig. 27
4. If it is just the gasket that goes against the front of the burn
chamber that needs to be replaced (Fig. 27 A), the gasket
groove can be cleaned and a new gasket can be glued into
place.
5. If replacing a glass gasket or glass, unscrew the closing
mechanism that is attached with screws and washers (Fig. 27 B).
6. Remove the glass holders (Fig. 27 C) that are attached with
4 screws (Fig. 27 D).
7. Lift out the glass.
Fig. 28
8. Thoroughly clean the gasket groove and glue new gaskets
into place: The glass gasket (Fig. 28 A), door gasket (Fig. 28
B) and the gasket under the glass (Fig. 28 C). Make sure the
door gaskets fit right into the corners (Fig. 28 D).
Fig. 29
9. Place the glass holders on a soft material with the side, as
illustrated (Fig. 29 A), turned up.
10. Apply a bead of glue into the gasket groove (Fig. 29 B) which
is now facing up.
11. Fit the gasket (Fig. 29 C) into the groove with the ends sticking
out as illustrated (11 cm on one side).
Fig. 30
12. Turn the glass holders and apply a bead of glue into the gasket
grooves. Note the overlap (Fig. 30 A).
13. When refitting, follow the same procedure in reverse order.
Remember to place a washer under the hinge.
ENGLISH
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jotul F 476 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 476 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info