467783
52
Zoom out
Zoom in
Previous page
1/100
Next page
52
Jøtul F 365 - Base de hierro fundido con
puerta de cristal
1. Monte la base de hierro fundido como se indica en el apartado
Jøtul F 361 - base de hierro fundido.
Fig. 16
2. Fije la bisagra de la puerta de cristal a la base con los tornillos
M6 x 20 mm que encontrará en la bolsa de tornillos para la
puerta (fig. 16 A).
3. Inserte el muelle entre los orificios roscados y la bisagra antes
de apretar los tornillos (fig. 16 B).
Fig. 17
4. Atornille bien el otro extremo del muelle en posición (fig. 17 A).
5. Fije el regulador de tiro de la puerta por la parte interior de la
puerta, en la esquina inferior derecha (fig. 17 B).
¡Atención! La distancia entre la puerta y la base debe ser uniforme
para que la puerta cuelgue recta. Si es necesario, ajuste la puerta
apretando o aflojando los dos tornillos (fig. 17 C).
Jøtul F 366 – Base de cristal
Nota: si conecta el manguito flexible a través de un agujero en
el piso, no retire las placas de cubierta desmontables (Fig. 18 A).
Fig. 18
1. Afloje los tornillos sujetando los clips de la mirilla superior
a cada lado (Fig. 18 B y C). Compruebe que la palanca del
respiradero de aire externo esté en la posición hacia delante
(Fig. 4D).
2. Si conecta un manguito flexible (Ø 100 mm) para el
suministro de aire externo al respiradero/toma de aire
externo(Fig. 4C) bajo la cámara de combustión, practique
primero un orificio (Fig. 18 A) en las placas de cubierta
desmontables antes de retirarlas.
Nota: mantenga la placa trasera de la base (Fig. 18 D) en su
lugar al retirar las placas de cubierta.
3. Retire la placa trasera (Fig. 18 D) de la base.
Fig. 19
4. Coloque la base en la posición correcta sobre la placa del piso
(si procede). Nivele el producto mediante los cuatro tornillos
de ajuste (Fig. 19 A). Fije la base a la cámara de combustión
con los 4 tornillos (M8 x 30 mm) que encontrará en la bolsa
de tornillos (Fig. 19 B).
ESPAÑOL
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jotul F 364 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 364 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info