Manual Jotul F 262 (page 15 of 76) (English, Dutch, French, Italian, Spanish)

467778

Zoom out

Zoom in

1/76

7.0 Maintenance

All maintenance must be done when the stove is cold!

7.1 Cleaning and soot removal

Soot deposits may build up on the internal surfaces of the

fireplace during use. Soot is a good insulator and will therefore

reduce the fireplace’s heat output. If soot deposits accumulate

when using the product, they can easily be removed by using a

soot remover.

In order to prevent a water and tar layer from forming in the

fireplace, you should regularly allow the fire to burn hot in order

to remove the layer. An annual internal cleaning is necessary to

get the best heating effect from your product. It is a good idea

to do this when cleaning the chimney and flue pipes.

7.2 Sweeping flue pipes to the chimney

Flue pipes must be swept through the flue pipe sweeping hatch

or through the door opening.

One of the baffles will have to be removed first in order to do this.

7.3 Inspection of the fireplace

Jøtul recommends that you carefully inspect your fireplace

yourself after it has been swept/cleaned. Check all visible surfaces

for cracks. Also check that all joints are sealed and that the gaskets

are in the correct position. Any gaskets showing signs of wear or

deformation must be replaced.

Thoroughly clean the gasket grooves, apply ceramic glue

(available from your local Jøtul dealer) and press the gasket well

into place. The joint will dry quickly.

7.4 Exterior maintenance

Painted products may change colour after several years’ usage.

The surface should be cleaned and brushed free of any loose

particles before new paint is applied.

8.0 Optional equipment

8.1 Soapstone top - 50 mm, c0mplete

Cat. no. 361080

8.2 Soapstone sides

Cat. no. 351247

8.3 Soapstone set, c0mplete

Cat. no. 351248

8.4 Fan for Jøtul F 260

Cat. no. 361101

9.0 Warranty

Jøtul AS provides its customers with a ten-year warranty with the

right to return external cast-iron items if they show defects as a

result of faulty materials and/or manufacturing after the initial

purchase/installation of the fireplace. The buyer is entitled to

return the goods provided that the fireplace has been installed in

compliance with current laws and regulations and in compliance

with Jøtul’s installation and operating instructions.

The warranty does not cover:

The installation of optional extras, for example, to rectify local

draught conditions, air supply or other circumstances beyond

Jøtul’s control. The warranty does not cover consumables, such

as burn plates, smoke baffles, fire grates, bottom grates, brick

refractories, dampers and gaskets as they deteriorate over time

due to normal wear and tear. The warranty does not cover damage

caused as a result of using unsuitable fuel when lighting the fire,

such as driftwood, impregnated and painted wood, plank offcuts,

chipboard, etc. Overheating may easily occur if unsuitable fuel is

used, i.e. the fireplace becomes red hot, which causes the paint

to discolour and the cast iron parts to crack.

The warranty is not valid for damage caused while the product

is in transit from the distributor to the delivery address. The

warranty is not valid either for damage caused by the use of

non-original parts.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jotul F 262 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jotul F 262 Manual

Product: