781057
4
Zoom out
Zoom in
Previous page
1/16
Next page
Scooter Instruction Manual
Installing the Rear Wheel Axle
and Brake Set and Rear Wheels
In a clean, dry place rest the stroller upside down with
the rear legs facing upwards.
Locate the rear axle and brake set and slide it onto
the rear legs with the link brake facing the rear of the
stroller. Be sure to slide each side all the way on until
the push pins are engaged in the holes of the plastic.
NOTE: You may need to push each of the push pins in
to slide the plastic into place. See Figure 4.
Pull upward on each side of the rear axle to ensure it is
installed properly.
Push the bar linking the brake levers into the disengaged
position. See Figure 5.
TO INSTALL A REAR WHEEL
Locate a rear wheel and slide it onto the rear axle with
the brake cluster facing inward.
Slide a washer onto the axle.
Locate an axle lock and orient it with the larger side
closest to the wheel and snap it onto the axle. See
Figure 6. Pull outward on the wheel to ensure it is
locked securely onto the axle.
Locate an axle cap and push it onto the axle lock until
you hear and feel it snap completely into position. See
Figure 7.
Locate a hubcap. While holding the wheel, line up the
four prongs on the hubcap with the holes in the spoke
of the wheel and snap it into place. See Figure 8. Be
certain that all four prongs have snapped into place.
Pull on the hubcap to ensure it is installed correctly.
Repeat these steps on the other side.
Be sure that each wheel is secure before proceeding.
Rear Wheel Brakes
The Scooter comes equipped with a linked rear wheel
brake system.
To engage the rear wheel brakes, push down on one
of the brake levers or the bar that connects the levers.
See Figure 9. The stroller may require slight forward or
rearward movement in order to line up the teeth on the
brake with each wheel brake cluster.
Check that the brakes are properly applied by attempting
to push the stroller backwards and forwards.
To release the brakes, gently lift up on one of the brake
levers or the bar that connects the levers. See Figure
10.
Page 3 Page 4
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joovy Scooter 33X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joovy Scooter 33X in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info