780403
6
Zoom out
Zoom in
Previous page
1/43
Next page
4
Installing, Operating and Removing the Tray
Before installing the tray, the right aligner must be installed onto the tray
• To attach this aligner to the tray, place the tray upside down on the oor or table. Also remove the
aligner from its packaging and place it open side up to the right of the tray. (2)
• Push the at locking button on the right toward the right. (3A) and insert the rounded end of the
aligner into the slot. (3B)
• Push the aligner all the way in until it stops and then release the locking button to lock it in place. (4)
• The left aligner is already attached to the tray.
• To install the tray, turn it so that the tray surface is on top.
• With each hand, reach under each side of the tray and press the spring-loaded release buttons
upward. (5)
• Align the two tray aligners with the posts on the high chair and slide the tray onto these posts. (6)
• Slide BOTH sides of the tray all the way toward the high chair seatback as far as they will go and
then let go of the release buttons to lock it in place.
• Make sure both sides of the tray are positioned at the same distance from the seatback.
• Gently pull upward on the tray to ensure it is installed properly.
• To adjust the tray position, squeeze the spring-loaded release buttons under BOTH sides of the
tray and either push or pull the tray into the desired position. (7) Always ensure that BOTH sides of
the tray are positioned at the same distance from the seatback.
• To swing the tray open, squeeze the locking button under the right side of the tray ONLY and pull
the tray toward the front of the high chair. (8)
NOTE: The tray swing feature will not work properly if both sides of the tray are not at the same
distance from the seatback.
• To close the tray, gently swing the tray back toward the aligner. The tray will automatically lock
into position.
• Use caution when closing the tray with the child seated in the high chair.
• To completely remove the tray, squeeze the spring-loaded release buttons on BOTH sides of the
tray and pull the tray toward the front of the high chair.
Unpacking the Product
Remove everything from the box – high chair, tray with tray insert, right aligner for tray and
documents (not shown).
• Discard all packaging materials properly, including plastic coverings.
• DO NOT allow children to play with any packaging materials.
Unfolding the High Chair
• Keep children away from high chair while unfolding.
• Stand to the side of the folded high chair, hold the handle behind the seat and pull upward on the
seatback until it locks into its upright position. (1)
• Be careful not to pinch your ngers as the seat is raised.
• Place one foot on the rear frame bar and try to move the seatback back and forth to ensure it is
secure in its upright position.
Assembly and Usage
IWARNING : Adult assembly is required for this
product. No tools required.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joovy Nook NB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joovy Nook NB in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info