780400
10
Zoom out
Zoom in
Previous page
1/69
Next page
8
Unpacking the Product
Remove everything from the box – Stand, High Chair/Booster seat, Plastic seat, Tray with tray
insert, Bassinet with included mattress and documents (not shown).
• Discard all packaging materials properly including plastic coverings.
• DO NOT allow children to play with any packaging materials.
IWARNING
Adult assembly is required for this product. No tools required.
Bassinet Assembly Mode (No. 1)
• Keep children away from bassinet while assembling.
• Face the bassinet bottom toward you on its side. (1)
• Pull open the two clamps on the bassinet bottom. (2)
• Unfold the two supporting legs from both sides of the bassinet. (3)
• Extend the bassinet mattress to allow the supporting legs to be located inside the locking clamps. (4)
• With one hand push the mattress bottom from inside and close both clamps until they snap in place. (5)
• Push down on both sides of the bassinet to ensure the clamps are secure.
The bassinet can now be use in standalone Mode No.1.
Attaching Bassinet to Stand Mode (No. 2)
• Open the stand by rotating the rear legs toward the oor until they lock into place. (6)
• Make sure BOTH adjustable legs are locked in the lowest position. (7)
• The bassinet can be attached to the stand ONLY in one direction.
• Identify the arrows on the sides of the bassinet. (8)
• Align the bassinet so that the arrows are pointing toward the front of the stand. (9)
• Align the slots on each side of the bassinet with the male brackets on the adjustable legs of the
stand. (10)
• Push the bassinet down until it locks into place. (11)
• Ensure that the release buttons on BOTH sides of the adjustable legs are in the OUT position. (12)
• Pull up on the bassinet to ensure it is secure.
Detaching the Bassinet
• To detach the bassinet from the stand, press the release buttons on BOTH sides of the stand. (13)
• Grasp the bassinet handles and pull it up o the adjustable legs. (14)
• To fold the bassinet for storage or travel, open both locking clamps on the bassinet bottom, fold
the legs and collapse the bassinet.
Attaching High Chair Seat to Stand Mode (No. 3)
• Open the stand by rotating the rear legs toward the oor until they lock into place. (6)
• Make sure BOTH adjustable legs are locked in the lowest position. (7)
• Unfold the footrest by rotating it toward the front of the seat until it locks into place. (15)
• The high chair seat can be attached to the stand ONLY in one direction– facing forward. (16)
• Align the slots on each side of the high chair seat with the male brackets on the adjustable legs of
the stand. (17)
• Push the high chair seat down until it locks into place. (18)
• Ensure that the release buttons on BOTH sides of the adjustable legs are in the OUT position. (19)
Assembly and Usage
IMPORTANT NOTE: Please refer to the end of this manual for all photos
that are referenced in parentheses in the instructions below.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joovy Foodoo Bassinet High Chair at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joovy Foodoo Bassinet High Chair in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info