780378
5
Zoom out
Zoom in
Previous page
1/16
Next page
EN FR ES
16 Using the Stroller with an Infant Car Seat (OPTIONAL)
NOTE: Seeinsertforalistofspeciccompatiblecarseatmodels.
Fully recline the seat.
Remove the bumper bar if it is attached.
Position each car seat converter so that the button faces downward. Then line up the hole in the converter with the post on the bumper
bar bracket and push the converter in until it clicks into place. See Figure 16.1.
Pull on each converter to ensure it is secure.
Place the car seat onto the stroller so that it is in a REAR FACING POSITION. See Figure 16.2. Ensure the car seat is level.
Stretch the strap of one converter over the car seat handle pivot point and position it between the car seat handle and the car seat. See
Figure 16.3.
Loop the strap around the peg on the side of the stroller. See Figure 16.4. Ensure this loop is secure to the peg.
Repeat for the other converter.
Buckle the restraining straps over the LOWEST part of the car seat (the straps are located in the pockets on the side of the stroller seat).
AdjustthestrapssotheyaretightaroundthecarseatbutAWAYfromthechild’sneck.Pulluponthecarseattoensureitissecure.See
Figure 16.5.
To remove the car seat, unlock the restraining strap buckle by pressing the two side releases. See Figure 16.6. Return the restraining
straps to their storage pockets.
Remove the strap of one converter from the peg. Detach the converter by pushing the button on the underside and pulling it off the
bracket. See Figure 16.7. Repeat for the other converter.
!WARNING
Strangulation Hazard: When not in use to secure a car seat, keep converters out of reach of children.
ALWAYS install the infant car seat so that the child is facing toward the rear (handle) of the stroller with the
restraining straps secured.
NEVERpositiontherestrainingstrapsonornearthechild’sneckasthismayresultinstrangulation.
TheinfantcarseatconvertersareforuseONLYwithspecicinfantcarseatmodels.Seeinsertforspecicmodels.
DO NOT use other infant car seat models.
Maintenance
Allofthettings,snaps,locks,rivets,andotherhardwareandplasticpartsonthestrollershouldbeinspectedperiodicallytoensurethat
they are secured properly and not damaged or malfunctioning. The restraint system, as well as all other straps and fabric items and their
stitching should also be inspected periodically to ensure that they are secured properly and not loose, torn or otherwise damaged. All moving
parts, such as wheels, brakes, and hinges should also be checked periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only
originalmanufacturer’scomponentsshouldbeused.Ifneeded,pleasecontactJoovyatourtoll-freephonenumber.
Cleaning
The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth.
Always allow the fabric to completely air dry before using the stroller. The frame and wheels should always be kept clean and free of dirt and
foreign matter, especially after operating the stroller in rain, snow, or other harsh environments. Use a sponge or cloth dampened with warm
water and a mild household soap or detergent to clean the wheels after such use.
SATISFACTION GUARANTEED
We want you to be completely satised with your purchase of this product. Should you experience any difculty in
assembling or using this product, or if you have any questions, please contact our Customer Service Department:
UNITED STATES - Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA - ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please log onto www.joovy.com to register your new Joovy product.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joovy Balloon 809X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joovy Balloon 809X in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info