Manual Jolly Motor JE50 RA9 (page 2 of 4) (English)

626531

Zoom out

Zoom in

1/4

enjoy motors ®

JE 50 RA 916 radio motor is a product from Jolly Motor España, s.l. www.enjoy-motors.com 2

JE50RA-916-STEEL_eng_ver. REM 2 & REM 2T

INSTRUCTIONS TO: USE; SAFETY; INSTALLATION; PROGRAMMATION

ELECTRONIC TUBULAR MOTOR build in receiver ers916 “JE50 RA9”

JE50 RA9

2 FIRST EMITTER LEARNING (main transmitter) through a power switch OFF/ON

switch

enjoy

Connect the motor as the wires

connect way above.

Switch power ON

Within 30 seconds,

press ONE time P3 button (back

side)

Then the motor will make a single

tilt movement, indicating that it is

ready to learning the emitter

Within 5 seconds,

press ONE time UP button

Then the motor will make two tilt

movementasConrmationthat

rstemitterhasbeenlearned

NOTE:tolearntherstemitter,youmustconnectonlyonemotoronthepoweroratleastbesurethattheswitchOFF/ONisbeingdoneonthemotorwhichyouwanttolearnthe

emitter. If more than one motor are connected to the same power line and the switch OFF / ON is done on them, all of these motors will learn the emitter over is pressed the P3

button.

4 LIMIT SWITCH ADJUSTMENT - IMPORTANT

Whenweareprogrammingthelimitswitchpoints(lowerandupper),wecanndthatthedirectionofthearrowsontheremotecontroldoesnotcorrespondwiththeactualdirection

in which the roller shutter is moving. It means, is possible press UP button and the roller shutter is moving DOWNWARDS and press DOWN button and the roller shutter can moves

UPWARDS. Don’t worry for it, after set up both limit switches, motor will change by itself to the right direction.

Otherwise, you can press Up botton and motor can move UPWARDS , so it means that motor movement are in correspondence with emitter buttons.

In any case, please follow the instructions above.

NOTE: always is necessary start on the lower limit switch, it is roller shutter in its closed possition

4-1 LIMIT SWITCH ADJUSTMENT - DOWN LIMIT SWITCH (roller shutter closed)

enjoy

Move the roller shutter downwards and

STOP the motor when it reaches the

LOWER wished limit point.

Press ONE time P3 button (located on the

back of the emitter)

Then the motor will make a single tilt

movementasConrmationthatLOWER

limit switch has been set up

4-2 LIMIT SWITCH ADJUSTMENT - UP LIMIT SWITCH (roller shutter opened)

enjoy

Move the roller shutter upwards and STOP

the motor when it reaches the UPPER

wished limit point.

Press ONE time P3 button (located on the

back of the emitter)

Then the motor will make two tilt

movementasConrmationthatUPPER

limit switch has been set up

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jolly Motor JE50 RA9 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jolly Motor JE50 RA9 Manual

Product: