768452
7
Zoom out
Zoom in
Previous page
1/123
Next page
910
7. After placing the base on the
vehicle seat, extend the load leg to
floor
12 , When the load leg
indicator shows green means it is
installed correctly, red means it is
installed incorrectly. 12 -1
! The load leg has 24 positions.
When the load leg indicator
shows red this means the load
leg is in the wrong position.
! Make sure the load leg is in full
contact with the vehicle floor
pan.
! Squeeze the load leg releasing
button, then shorten the load leg
upwards.
The completely assembled base is
shown as 13
! The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. 13 -1
! The load leg must be installed
correctly with green indicator.
13 -2
8. Push the infant carrier module
down into the base 14 , if the
infant child restraint is secure, the
infant child restraint indicator
shows green. 15
11
1
10
21
12
1
3. If base used previously with
iAnchor Advance seat remove
rebound bar as shown in illustration
8
! Store safely for future use with
iAnchor Advance seat. 9
4. Press the ISOFIX release button on
either side of the base, then pull
out the ISOFIX connectors. 10
5. Line up the ISOFIX connectors with
the ISOFIX guides, and then click
both ISOFIX connectors into the
ISOFIX anchor points. 11
! Please consider that base MUST
be connected via ISOFIX to the
car. Attachment of base only with
car seat belt is not permitted
according to ECE R129. For a
safer drive of your child you are
free to decide on whether to
install the base with or without
car seat belt in addition to ISOFIX
attachment.
11 -1
! Check to make sure the base is
securely installed by pulling on
the both ISOFIX connectors.
6. There are 9 adjustable positions for
ISOFIX. Press the ISOFIX release
button and push the base back
against the vehicle seat until tight.
13
12
14
15
82
1
1
9
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Joie i-Gemm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Joie i-Gemm in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 16,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info