37746
9
Zoom out
Zoom in
Previous page
1/16
Next page
T600MSx-3 Multi-Stage Thermostat Installation Instructions 9
Operation
Programming/Operating the T600MSx-3
Thermostat
Once the thermostat is configured via the Installer
Configuration Menu, its operating parameters can be
programmed via the Main User Menu. Access this
menu by pressing the MENU key during normal
thermostat operation. The Main User Menu contains
the basic operating features of the thermostat.
The Main User Menu also uses Auto Help, which is
displayed automatically in the menu when there is a
pause in programming activity. To exit Auto Help,
continue with the programming selection. When the
thermostat is in the Main User Menu and is left
unattended for 45 seconds, the menu reverts to the
Status Display Menu.
Follow the steps in Table 3 to program the thermostat.
Note: Schedule Set and Clock Set are available on
T600MSP-3 models only.
Enabling Temporary Override Schedule
Note: The Override Schedule function is available in
T600MSN-3 models only when DI1 or DI2 is configured
as remote NSB.
Note: The Override Schedule prompt only appears
when in the Unoccupied (Unoccup) or Unoccupied
Hold (Unoccup hold) Mode.
The override schedule prompt only appears when the
thermostat is in the unoccupied state. This menu
selection gives the user the option of overriding the
unoccupied setpoints with the occupied setpoints for
the amount of time specified under the TOccTime
parameter. See the Configuring the T600MSx-3
Thermostat section.
Note: If DI1 or DI2 is configured to operate as a
remote override contact, this menu is disabled.
To override the unoccupied state while in the Main User
Menu:
1. Press the NO key to all prompts until the Override
Schedule prompt appears. If the thermostat is in
the unoccupied state, this is the first prompt.
2. Press the YES key to enable the temporary
override. The thermostat returns to the Status
Display Menu.
When scrolling through the Status Display Menu,
Override now appears for the schedule status
parameter.
Table 3: Programming the T600MSx-3 Thermostat
(Part 1 of 2)
Thermostat
Display
Description
Press the MENU key while in the
Status Display Menu to enter the
Main User Menu.
Overrides Unoccupied Setpoints
Only Appears if Thermostat is in
Unoccupied State
See the Enabling Override Schedule
section.
Cancels Override mode.
Sets the Temperature Setpoints
See the Entering Permanent
Temperature Setpoints section.
Selects the System Mode Default:
Automatic (auto)
See the Selecting the System Mode
section.
Selects the Fan Mode Default:
Automatic (auto) for T600MSN-3
Smart (smart) for T600MSP-3
See the Selecting the Fan Mode
section.
RoomTemp
75.0
°
F
Override
schd Y/N
Cancel
ovrd Y/N
Temperat
set? Y/N
Sys mode
set? Y/N
Fan mode
set? Y/N
Sets the Occupied and Unoccupied
Time Periods
See the Programming the Daily
Schedule – Two-Event
and
Programming the Daily Schedule
Four-Event
sections.
Sets the Day and Time
See the
Setting the Day and Time
section.
Sets a Permanent Hold on the
Schedule or Resumes the Schedule
See the
Setting Schedule Hold
section.
Table 3: Programming the T600MSx-3 Thermostat
(Part 2 of 2)
Thermostat
Display
Description
Schedule
set? Y/N
Clock
set? Y/N
Schedule
hold? Y/N
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Johnson Control T600MSP-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Johnson Control T600MSP-3 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info