Manual Jocca 6643 (page 15 of 24) (English, French, Portuguese, Spanish)

553861

Zoom out

Zoom in

1/24

!)&!&$&'""$&$

-Before any threading operation please ensure that the machine is disconnected

from the mains electricity supply.

-To start to thread the upper thread please take the following steps:

1.Lift up the presser foot by means of the lever (nº 8)

2.Lift the needle up manually to its highest point. To do this turn the manual wheel

(nº 11) in the direction indicated by the arrows (clockwise).

3.Put in place the bobbin that you wish to use in the bobbin slot (nº 14). If you wish

to use larger bobbins pull up the bobbing slot and this will enlarge in order to hold

larger bobbins.

4.One the bobbin is in place, pull on the end of the thread and thread it through

guide 1 (nº1).

5.Thread the thread through as indicated by the arrows. Firstly under the right hand

side of the tension disc (nº 21) and when reaching the rim lift the thread up through

the left hand side of the tension disc (nº 21) until reaching the shuttle lever (nº 2)

and hook up the thread to the same.

6.Then thread downwards until reaching guide 2 ( nº 4)

7.Finally thread the needle. The needle threader can be used for this purpose and

the needle must always be threaded from front to back.

Please see the illustration for threading the needle.

!)&! &!)$&$!

-The thread bobbin is located inside the lower spool, and at the same time this is

to be found underneath the needle. To access the same the following steps should

be taken:

1.Slide forwards the lower arm of the machine towards the left and you will find a

little compartment.

2.Open the compartment by using the side rim and pull it towards you. One the

compartment is open you will see the spool.

3.Pull the spool towards you by means of the central rim, pick up the bobbin that

you wish to use, and then put it on the inside of the spool holding one end of the

thread with your hand.

4.Then thread through the notch until it comes through the lower slot of the spool.

5.Once the bobbin is in place in the spool and with the thread correctly threaded

as indicated in the previous section, place the spool with the bobbin inside the com-

partment. There is only once way to place it, and this is with the outlet facing

upwards.

28-E E-29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jocca 6643 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jocca 6643 Manual

Product: