553868

Jocca 2105 Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
26-E E-27
-If vibration has been stopped suddenly or works in an oppo-
site direction than was marked:
CLEANING AND STORAGE
When the armchair is not used:
-Unplug the device if it is not going to be used for a long time.
-Put the armchair in a clean and dry place.
Conservation:
-Always maintain the armchair clean and free from dust.
-Maintain the armchair in a place where it is not affected by humi-
dity.
-When the armchair is not used for a long period of time, use a
cloth to cover it and protect it fro dust.
-Do not place the armchair in places with direct exposition to sun-
light or high temperatures; the leather could be discolored.
Maintenance of the massage armchair:
-Block the power supply and unplug the device before cleaning
the armchair.
Maintenance of the main body of the massage armchair:
-You can use a neutral detergent to clean the plastic parts and the
grammed for 30 minutes and massage intensity (c) for level 5.
-For automatic start an armchair is programmed a massage from
mode 1 till mode 10, an automatic light mode AUTO switches on
and each of massage mode will last 1 minute.
-If you want to add massage intensity, press and a light will
indicate you an intensity level from1 to 10.
-If you press , a massage automatic mode fixes.
-If you press , you can programme massage time from 1 to
99 minutes. For automatic start an armchair is programmed for 30
minutes, press to achieve the wished time.
-If you want to change a vibration type, you must press or
to select a vibration mode from level 1 to 10, a light will indi-
cate you a massage mode.
-If you want to select a massage zone: calves, gluteus, lower
back, higher back or all together, press .
-If you want to active a heating function, press , a light will
indicate you an activated function.
POSSIBLE PROBLEMS
-Check the following possible functioning problems if the massa-
ge armchair does not work properly. These problems can be sol-
ved in an easy manner following the instructions below.
-Do not dismantle or repair any part of the armchair by yourself.
-If vibration does not work:
Possible problems Possible solutions
An adaptor is not plugged in
correctly.
Plug in correctly an adaptor.
A remote control is discon-
nected.
Connect a remote control to an
armchair and press I/O button.
Possible problems Possible solutions.
Vibration stops automatically
because a timer is predetermi-
ned for 30 minutes.
Switch on a remote control
pressing On/Off.
Does not work correctly. Disconnect a device from light
during 20 minutes and after-
wards connect it again.
A connector is not connected
correctly.
Check if all the connections
have been made correctly.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jocca 2105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jocca 2105 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info