509113
15
Zoom out
Zoom in
Previous page
1/20
Next page
- 15 -
15. Emergency Erase
The photoGPS has an emergency erase function, which can be used to delete all the currently stored
captures. This may be useful if, for example, you are away from your computer and realize that you
did not erase the captures after your last geotagging session. Or the photoGPS may be running out
of space and you want to sacrifice the current stored captures to allow new ones to be created.
Please use this function with care. If you have not previously stored the captures then they will be
lost forever and cannot be used to geotag your photos.
To perform an emergency erase:
- disconnect the PhotoGPS from the computer
- press and hold the Reset button, as above
- simultaneously, press and hold the GeoHint button
- release the reset button (continue to hold the GeoHint button
- the red status LED should flash four times, if so you can release the GeoHint button, if not,
repeat the process again
- wait for the green status LED to flash twice
- all the captures have now been erased and the photoGPS is ready for use
16. Capture Delay Setting
Some cameras generate a lot of electromagnetic interference, which can affect the performance of
the photoGPS. Typically, this interference is worst when the camera is taking a photo. For this
reason, the photoGPS does not take a capture at exactly the same time as the camera shutter is
pressed. Instead, there is a short delay before taking the capture, to avoid the worst of the camera
interference.
The default delay is approximately one second. However, every camera is different and there is no
universal best delay setting. Even for a single camera, the interference effects may change according
to e.g. the shooting mode, image size, flash card speed etc. If you find that your photoGPS gives
consistently poor results, even with a clear view of the sky, then it may be worth trying different
delay settings.
To change the default capture delay, connect the device to your computer and run the photoGPS
software. Next press the ‘Configure Device’ button and then the ‘Advanced Settings’ button in the
device window. Now select one of the delay settings. You can choose various settings from zero to
three seconds.
If problems persist, please contact JOBO and provide details on your camera make and model.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jobo photoGPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jobo photoGPS in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jobo photoGPS

Jobo photoGPS User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info