701370

JL Audio ZR570-CSi Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
10 JL AUDIO ZR570-CSi
TWEETER INSTALLATION:
First, run speaker wires from the tweeter output
of the crossover (see diagrams on page 5) to the
desired tweeter mounting locations, observing
the same precautions as mentioned in the woofer
installation section. Terminate the wires with the
supplied 2.8 mm male crimpable connectors.
TWEETER FIXTURE INSTALLATION:
The dome tweeters supplied with your
ZR570-CSi system have been designed for
maximum mounting versatility. There are two
primary methods by which the tweeters can be
mounted in your vehicle:
Flush-Mount: Two different styles of flush-mount
fixtures are provided: a compact, simple design and
an enhanced design. Both are installed using the
same method (shown in Diagram E), but require
different size mounting cutouts. Refer to page 2 for
cutout dimensions.
Flush-mounting yields a custom-installed
appearance, but will require at least 3/4-inch (19
mm) of clearance behind the mounting surface of
the tweeter. Install as shown in Diagram E, using
the spring clips and 1-inch machine screws (it may
be necessary in some limited depth applications to
cut down the length of the machine screw, or use
a shorter screw (not supplied). Hand-tighten the
machine screw until the fixture is secure.
Surface-Mount: In this application, you will not
need to cut large holes in your vehicle’s panels for
the tweeters. You will only need to drill a hole for
the wires and two smaller holes for the mounting
screws. This application is useful when mounting the
tweeters to a panel that has insufficient clearance
behind it for the tweeter’s magnet structure.
Using the fixture as a template, mark the screw
hole locations and a location in the center of the
fixture for the wire hole. Remove the fixture and
drill pilot holes for the screws and a 1/8-inch (3
mm) for the wires. Use the supplied #6 x 5/8-inch
sheet metal screws to secure the fixture as shown in
Diagram F (hand-tighten). Run the tweeter's wires
through the hole and insert the tweeter until it
snaps into place.
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JL Audio ZR570-CSi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JL Audio ZR570-CSi in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info