700483
6
Zoom out
Zoom in
Previous page
1/20
Next page
6
AUX-IN – To PreAmp Aux Source
CAN – NMEA2K Network
POWER CONNECTIONS
REMOTE – MediaMaster® MMR-20 Remote Control (Sold Separately)
USB – USB Storage Media or iPhone® 5 or 6
ANT – Motorola® Style Antenna
SIRIUSXM – SiriusXM® Connect Tuner (Sold Separately)
ZONE4 (FIXED LEVEL)
ZONE1 (MAIN)
ZONE2
ZONE3 (SUB)
+12VDC (Red) Switched +12V Power
ILLUMINATION (Orange) +12V Lighting Circuit
GROUND (Black) Ground
AMP TURN-ON (Blue) Remote Output to Amplier
To Amplier
5A Fuse
GENERAL CONNECTIONS
Label Wire Color Connection
+12VDC Red
Connect to a positive (+12V) source. This can be an ignition controlled,
accessory circuit or a vessel battery equipped with a main disconnect
switch. For added control functionality, we also recommend installing
a dedicated toggle switch (not included) at this wire lead’s +12V
connection point. Always install an appropriate fuse within 18 inches
(45 cm) of the +12V connection. If this is the only device using the
connection point, use a 5 amp fuse.
GROUND Black
Connect to a clean metal chassis ground, if available. If no metal chassis
ground is available, it may be necessary to connect this to the NEGATIVE
battery post. All ground connections (source unit and amplifiers)
should be made at the same location to minimize noise.
ILLUMINATION Orange
Connect to a +12V lighting circuit to automatically switch the
illumination to night mode when the lights are activated.
AMP TURN-ON
Blue
This wire provides a positive (+12V) turn-on voltage to activate
aftermarket amplifiers.
POWER CONNECTIONS
The 4-pin plug with wire leads is used
to make power related connections.
Make sure to carefully plan the wiring of
your system prior to routing wires and
making connections. Refer to the table
below when making power connections.
Disconnect the NEGATIVE battery
post connection and secure the
disconnected cable to prevent
accidental reconnection. This is
an essential safety precaution
during installation!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JL Audio MM100s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JL Audio MM100s in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info