700463
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
INPUT SECTION
The XD200/2v2’s input section allows you to
send signals to the amplifier section through the
use of two differential-balanced inputs.
Input connections are via up to one pair of
traditional RCA-type jacks.
Input Voltage Range:
Input Voltage Range: A wide range of signal
input voltages can be accommodated by the
XD200/2v2’s input section (200mV – 8V). This
wide range is split up into two sub-ranges,
accessible via the “Input Voltage” switch:
“Low: for preamp level signals
High”: for speaker level signals
The “Low” position on the “Input Voltage
switch selects an input sensitivity range between
200mV and 2V. This means that the “Input Sens.
rotary control will operate within that voltage
window. If you are using an aftermarket source
unit, with conventional preamp level outputs, this
is the position you should select.
The “High” position on the “Input Voltage
switch selects an input sensitivity range between
800mV and 8V. This is useful for certain high-
output preamp level signals as well as speaker
level output from source units and small
amplifiers. To use speaker level sources, splice the
speaker output wires of the source unit or small
amplifier onto a pair of RCA cables or plugs,
or use the JL Audio ECS Speaker Wire to RCA
adaptor (XD-CLRAIC2-SW).
Line output converters are usually not needed
with the XD200/2v2. If you find that the output
cannot be reduced sufficiently with a direct
speaker level signal applied to the amplifier and
the “Input Voltage” switch in its “High” position,
you may use a line output converter or voltage
divider to reduce the signal level.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JL Audio 2v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JL Audio 2v2 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info