623895
33
Zoom out
Zoom in
Previous page
1/39
Next page
ENGLISH
33
CD-PLAYER
Audio-CD abspielen
• Switch the device into playback mode and insert an audio CD as as previously described.
• In the display (7), the total number of tracks on the CD will be shown for 2 seconds. The display will change
to indicate the time. Press the DISPLAY button (5) to display the total number of tracks again for 2 seconds.
• If the CD is being played, you can use the DISPLAY button to show the current played track number (approx.
2 seconds).
• Playback/pause: Press the button (10) to start and pause playback. If playback has been paused, the
track number will blink in the display (approx. 2 seconds).
• Stopping playback: Press the button (13) to stop playback. The total number of tracks on the CD will be
shown in the display (approx. 2 seconds).
• Next or previous track: Use the /MINUTE (12) and /HOUR (11) buttons to skip a track forward/
back. When the button /MINUTE (12) is pressed once, the current track will be played from the
beginning. When the button is pressed twice, then the previous track will be played. When the /HOUR
button (11) is pressed, the next track will be played.
• Fast forwarding and rewinding: By holding down the /MINUTE (12) and /HOUR (11) buttons, you
can fast forward or rewind the current track. Once the desired place has been found, let go of the button to
continue playback.
Repeat function
• You can set this function while a track is being played back or when the device is in stop mode.
• Press the PLAY MODE button (8) once to continuously repeat the current track. The LED indicator
REPEAT(F) will blink in the display.
• Press the PLAY MODE button twice to continuously repeat the entire CD. The LED indicator REPEAT will
come on.
• Press the PLAY MODE button twice to switch off this function.
Random playback
• Press the PLAY MODE button (8) three times to play all tracks in random order. The LED indicator
RANDOM(B) will come on.
• Press the PLAY MODE button again to switch off this function.
Programming a playback list
• You can program the CD player to play a sequence of up to 20 tracks.
• Switch the device on with the ON/OFF button (17) and then switch the device into CD playback mode.
• Press the PROGRAM button (9) once to switch to programming mode. The number of the storage space,
P.01, will be shown briefly on the display. Then, the track numbers .00 and the LED indicator PROGRAM (G)
will blink in the display (7).
JGC-URCD-20-IM-DE-EN-V1.indb 33 29/01/2010 5:26 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC URCD-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC URCD-20 in the language / languages: English, German as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info