623887
30
Zoom out
Zoom in
Previous page
1/46
Next page
English
5. BASIC OPERATION METHODS
Basic interface connection
5.1 Connection Method of Power Supply:
Align the power supply plug on AC adapter with the jack on the machine cover marked with DC12V (16).
5.2 Connection Method of External Antenna Conversion Line:
Plug off the telescopic antenna plug, plug the attached antenna plug into the antenna jack on TV set (18).
5.3 Connection Method of Telescopic Antenna:
Align the telescopic antenna plug with the antenna jack on the TV set, and just plug in till its end is OK (18).
5.4 Connection Method of Earphone:
Align the earphone plug with the earphone jack on the TV set, and just plug in till its end is OK (17).
Notice
If earphone is applied, the sound only transmits through the earphone, and no sound is available from the
speaker of TV set.
5.5 Connection Method of AV Input
a.Just insert the plug of the external video line into yellow jack of AV exchange head and audio left
track plug into the white jack and audio right track plug into the red jack.. Then insert the AV plug
into AV/IN jack (20).
b. In VGA mode, Insert the left audio plug into white port of AV exchange head, right into red port.
Then insert the AV head into AV/IN jack (20).
Notice
Only English is OSD menu language in AV mode.
5.6. Connection Method of AV Output
Just insert the yellow plug of the AV output line to video jack, the audio left track plug to the white jack, the
audio right track plug to the white jack. Then insert the AV head into the AV/OUT jack (15).
Notice
The AV output function is useful in DVB/AV mode only.
5.7. Connection Method of VGA
Just insert the connect line to the VGA port of PC, and tighten the screws to keep good contact. Then plug
the another end of the line to the VGA port of the TV set and tighten the screws as the same.
Basic operation methods of TV set
1. Connect with power supply and turn on the power switch. In normal status, the power light is green. If the
light is red, press the Power key to turn on the TV set.
2. Pull out telescopic antenna.
3. Press CH-/CH+ to choose the desired channel.
4. Adjust the sound volume of the TV.
6
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC TFT 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC TFT 800 in the language / languages: English, German as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info