623878
21
Zoom out
Zoom in
Previous page
1/32
Next page
RADIO
21
ENGLISH
OPERATION
1. To select your sound source, adjust the
FUNCTION selector to CD/MP3/USB/SD, TAPE(OFF) or
RADIO.
2. Adjust the sound with
VOLUME.
3. To switch off the power, set the FUNCTION selector to TAPE(OFF) position.
RADIO RECEPTION
1. Set
FUNCTION switch to RADIO position
2. Select your desired broadcasting band (AM or FM) by pressing the
BAND button. The symbol of
the selected band is displayed.
3. Use the
TUNE-UP or TUNE-DOWN button to adjust the frequency and select the desired radio
station.
Automatic tuning: Press and hold the buttons until the scanning starts. If a strong enough station
is found, the scanning will automatically stop.
Manual tuning: Briefly press the buttons to manually adjust the frequency. This way you can tune
into weaker stations not found by automatic tuning.
4. If the tuned station is broadcasting in stereo, the FM ST. indicator will light up.
5. When you have finished listening, slide the
FUNCTION selector to the TAPE(OFF) position.
If FM reception is weak, stereo may be indicated but the sound may not be good. In this case,
switch the FM MODE button to receive in mono only.
For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the
signal is too strong (very close to a transmitter).
For AM the set is provided with a built-in antenna so the telescopic antenna is not needed.
Direct the antenna by turning the set itself.
RADIO MEMORY (STATION PRESET MEMORY STORAGE)
To store a desired station into a specific memory position, first tune in the desired station as
described above.
Press MEM. SET button once.
Press NEXT or BACK to select desired memory position.
Press MEM.SET button again once to save the selected station into the selected memory
position.
To recall any memorized station, simply press MEMORY key and then press BACK or NEXT to
select the desired station memory. The saved station will be recalled.
To clear the memory of any positions, simply save a new station to the same memory position.
(There are 30 memory positions for FM and 20 memory positions for AM).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC RRMP4600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC RRMP4600 in the language / languages: English, German as an attachment in your email.

The manual is 6,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info