623882
24
Zoom out
Zoom in
Previous page
1/41
Next page
ENGLISH
24
IMPORTANT SAFETY INSTRUCTIONS
Installation location
Use this device in dry indoor areas only and never outdoors.
Warning: Do not use this device near water or heavy moisture; e.g. in a damp basement or beside a
swimming pool or bathtub.
Use this device in well-ventilated areas. Do not block off the air openings. Put the device in a place only in
accordance with the manufacturer’s instructions. Keep a minimum free distance of 10 cm around the device
in order to allow for sufficient cooling. Do not cover the device with newspapers or other textiles such as
drapes, blankets and clothing.
Keep this device away from all heat sources like for example, ovens, hot plates and other heat-producing
devices/objects.
In order to reduce the risk of fire and electric shock, do not expose the device to fire (fireplace, grill, candles,
cigarettes and so on) or water (water drops, water splashes, vases, tubs, ponds and so on).
Only use this device in temperate latitudes; avoid using it in tropical and in especially damp climates.
Do not use this device in a very dry environment. This can result in electrostatic discharges.
Protect this device from extreme heat (over 35°C) and cold (under 5°C) as well as from direct sunlight and
dust.
Do not place this device near objects which create a strong magnetic field (e.g. motors, loudspeakers,
transformers).
Power supply
The mains voltage must match the information on the rating label of the device.
The power plug is used as the disconnect device. Please be sure that the power plug is in operable
condition.
Only removing the power plug can separate the device completely from the mains supply.
The power switch does not separate the device from the mains. In order to separate the device from the
power supply, unplug the power cord.
Avoid damages to the power cord that may be caused by kinks or contact with sharp corners.
Make sure, the device, including power cord and power plug are not exposed to hot surfaces.
Only unplug from the power outlet by the plug itself. Do not pull on the cord.
Disconnect the power plug when the device is not in use, in case of malfunctions and prior to each cleaning.
Unplug the power cord during lightning storms and prolonged absence in order to protect the electronics
against overvoltage and damage.
If the power cord or the casing of the device is damaged or if the device is dropped, the device may not be
used before it is examined by a professional electrician.
A damaged power cord may only be replaced by the manufacturer or a workshop commissioned by the
manufacturer or by a similarly qualified person in order to avoid hazards.
Protect the power cord and the housing from damage.
JGC-RRMP-8310-IM-DE-EN-V1.indb 24 14/05/2010 3:50 PM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC RRMP-8310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC RRMP-8310 in the language / languages: English, German as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info