Manual JGC MS450-3CD (page 22 of 32) (English, German)

623868

Zoom out

Zoom in

1/32

BASIC OPERATION

ENGLISH

TIME SETTING

Time setting is only possible during standby mode

1. Press MEM/CLOCK, button, hour display starts to blink.

2. Press CD/TUNING +/- button for HOUR setting ,then press MEM/CLOCK button to store.

3. Press CD/TUNING +/- button for MINUTES setting now, and press MEM/CLOCK button to store.

TIMER SETTING

1. Press MODE button to display the time.

2. Press MODE button again to display power-on time (indicated by

ON).

3. Press MEM/CLOCK to enter setting mode. Use SKIP+/- buttons to

set power-on hour. Press MEM/CLOCK and use SKIP+/- buttons to

set power-on minutes. Press MEM/CLOCK button to exit setting and

store.

4. Press MODE button to display power-off time (indicated by OFF).

5. Repeat step 3 to set the power-off time.

6. Press MODE button to display the power-on source.

7. Press MEM/CLOCK and use SKIP+/- buttons to select the power-on

source. Press MEM/CLOCK button to exit setting and store.

8. Switch the system to standby mode. When reaching the preset time, the selected source will play

and switch off again at the preset time.

Active timer is indicated by showing on the display.

NOTE:

• The timer setting will automatically cancelled if no button is being pressed for more than 10

Seconds.

• If the selected source CD is not available when activated by timer, TUNER will be selected

automatically instead..

DEACTIVATE THE TIMER

• Press

TIMER button to deactivate this function, will disappear on the display. To activate the

timer again with the preset time, press the TIME button again.

• To cancel active timer until next day, press the

STANDBY/ON button.

SLEEP TIMER:

SLEEP mode is set on or off by pressing the

SLEEP button is pressed on the remote handset. Press and

hold the SLEEP button to change the SLEEP timer to 90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes

backwards in 10-minute steps. Active sleep timer is indicated by SLEEP in the display

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JGC MS450-3CD in the language / languages: English, German as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JGC MS450-3CD Manual

Product: