623865
38
Zoom out
Zoom in
Previous page
1/48
Next page
ENGLISH
37
RADIO OPERATION
• Press the FUNC button (32) repeatedly until TUNER is shown in the LCD display (5). The device is now in
radio operation. You can also press the TUNER/BAND button (34) in order to switch to radio operation.
• Press the TUNER/BAND button (34) to switch between FM (frequency modulation) and AM (amplitude
modulation).
• With the id3/FM MODE button(47), you can switch between mono and stereo reception. Only FM stations
will be broadcast in stereo. On the display, the following symbol is shown for stereo reception: ((ST))
If the FM stereo reception is weak or noisy, you can switch into mono operation in order to improve the
reception quality.
Antennas
• The device is equipped with two antennas – a wire aerial(26) for the FM area and an internal ferrite antenna
for AM.
• Unwrap the FM aerial and set it up (for FM band). Find the optimum position for the device in order to get the
best possible reception (for AM band).
Station searching
• Manual search
Repeatedly press the button TUNE-(51) or TUNE+(35) until the display shows the desired radio
station. Use the manual method for fine-tuning of weak or distant stations which cannot be recognised
independently from the automatic tuning.
• Automatic search
Hold the button TUNE-(51) or TUNE+(35) down until the display begins to move. Then let go of
the button. The radio searches for the next strong signal. Repeat this procedure until you find desired station.
End the automatic station search by pressing the button TUNE-(51) or TUNE+(35) again.
Station programming
• You can store up to 40 stations. There is storage space for 30 FM and 10 AM stations available.
• Select a station with the manual or automatic station search.
• Press the PROG./REPEAT button(46). The number of the current storage space flashes. Additionally, the
word MEMORY is shown.
• Select the desired storage space with the button MEM./FOLDER+(38) or MEM./FOLDER-(49).
• Press the PROG./REPEAT button again in order to confirm saving of the shown station in this storage space.
The station is stored if the number stops flashing.
• Proceed with saving further stations.
• Once you have saved several stations, you can call them up by pressing the button MEM./FOLDER+(38) or
MEM./FOLDER-(49) several times.
• You erase a station from the storage space if you save another station on this storage space. The previously
saved station will be erased.
The saved stations will not be erased if you pull the plug (29).
If you do not press any buttons for 10 seconds, the station programming will be cancelled.
JGC-MS-Z55-IM-DE-EN-V3.indb 37 02/09/2009 11:17 AM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC MS-Z55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC MS-Z55 in the language / languages: English, German as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info