623815
28
Zoom out
Zoom in
Previous page
1/36
Next page
BASIC OPERATION
15. PTY (Program Type)
Enable or disable PTY SEARCH ON/OFF,
default is OFF.
When PTY SEARCH is on (PTY Icon is
displayed), and the selected program type
matches, PTY info program is displayed, If
there are no keys entered for 2sec ,
previously selected PTY is searched, while
PTY info program is blinking. If PTY code is
different or not available, PTY NONE is
displayed and returnes to the previous
selection station.
By pressing PTY once, MUSIC is displayed.
When PTY is pressed the second times,
SPEECH is selected, press a third time to
EXIT PTY. The buttons M1~M6 keys can
be used to select the desired program type.
16. AF (Alternative Frequency) / REG
(Regional)
- AF (Enable or disable AF function):
AF option is available at the current station,
AF icon is ON, otherwise it blinks. (Default
is ON)
- REG :
Press this button for longer than 2 sec to
toggle REG ON/OFF, default is OFF When
REG ON, the receiver accepts RDS stations
with regional variants and when REG OFF,
the receiver ignores regional variants.
17. MODE
Change mode in the following sequence:
TUNER -> CD -> (* SD/MMC) -> (*USB)
-> TUNER
(* available only if there is media device in
SD/MMC, USB slot)
18 & 20. T (Tune, Track) UP / DOWN
- Tune Up / Down in Radio Mode:
Manual Tuning Mode : Press button more
than 2 seconds to tune each frequency step
upward or downward
Seek Tuning Mode : Press button to search
a next or previous station automatically
- Track Up (FF) / Down (REW) In CD, SD-
MMC / USB-Mode:
Track Up / down : Press to move to next or
previous Track
Track FF / REW : Press more than 2 sec-
onds to activate fast forward (FF) or fast
reverse (REW) search in a track
19. BAND / ID3 Display
- BAND in Radio Mode
Change radio band in the sequence of
FM1 -> FM2 -> FM3
- ID3 Display in USB, SD,CD Mode
Press to see ID3 Tag information.
(* Refer to MP3 operation for further details.)
21. OPEN (Front Panel Open)
Press to open the front panel
22. FLASHING LED LIGHT
Red LED light will be flashing if the front
panel is detached.
23. RESET
Press [OPEN] button and remove the front
panel and press [RESET] button with clip or
pin to set the unit back to the factory default
setting.
24. DISC EJECT
Press to eject the Disc inside the CD slot. If
the disc is not removed after ejecting, the
disc is reloaded automatically without
playing.
25. DISC SLOT
Insert a disc into this slot.
10
ENGLISH
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC AR-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC AR-500 in the language / languages: English, German as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info