509209
13
Zoom out
Zoom in
Previous page
1/18
Next page
XA4200,XA4300
JENSEN
lkoubleshooting
Problem Corrective Action
Repair wire or connections.
Check connections to radio with test light.
Amplifier does not operate
Ipower LED not on) when
/chicle and radio are on
No power to +12V terminal
No power to remote wire with radio on
Fuse blown Check fuse.
J
?adio volume needs to be
urned up too high for amp
o work
Input level control adjusted too low Adjust input level control.
3adio volume is too sensitive
sound from only one speaker
Input level control adjusted too high
Defective speaker
Adjust input level control to lower setting.
Replace speaker.
Poor connections to speaker (wire) Check connections.
RCA input cable defective Replace cable.
I
Separate speaker wires and insulate.
71
Reroute RCA away from main power wires.
I
Input level control adjusted too high
Speaker wires shorting together
Power wires hooked up incorrectly
Speakers blown or defective
sound distorted
Ingine noise
Ignition noise/static or
Alternator whine)
Improper ground connections
Ground loop(s)
Reroute RCA cable.
Make sure amp is grounded to a clean, solid part of the chassis/frame.
I
‘rotect light comes on/
amplifier shuts down
Let amp cool down before attempting to turn back on (some installations may
require a fan to keep the amp cool, especially if you are driving subwoofers with
the amp).
Check speakers and/or crossovers for loose or bad connections.
Faulty speaker connection and/or
crossover
Low battery voltage Make sure you are getting between 10.8-15.6 volts to the amplifier with a digital
multimeter measured at the amplifier.
If you are using 4 ohm speakers you cannot have more than two speakers wired
in parallel per channel. Amp will not operate into 2 ohms bridged.
Speaker impedance less than 2 ohms
per channel
lo output on channels Speaker wires not connected to
speakers properly
input hooked up incorrectly
Refer to pages 6 - 9 for proper installation.
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen XA4300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen XA4300 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info