Manual Jensen SD1413 (page 8 of 23) (English)

509269

Zoom out

Zoom in

1/23

SD1413

Preset Stations

Up to six stations on each band can be stored

as presets and can then be instantly recalled by

pressing the associated preset button on the

front panel (19-24) or remote control. To store a

station, turn the radio on and select the desired

band and station. Press and hold the desired

preset button (numbered one through six on the

face of the radio or remote control) for more

than two seconds. When stored, the preset

number will appear in the display. The station is

now stored and can be recalled at any time by

pressing the corresponding preset button.

Repeat for the remaining five presets on the

current band and for all presets on the other

three bands.

Preset Scan/Automatically Store

(PS/AS)

Automatically Store

Select six strong stations and store them for all

bands using the Automatic Store feature. To

enable this feature, press and hold the PS/AS

button (17) for more than two seconds. The

radio will automatically scan each band and

enter strong stations into the preset memory

positions. After entering the stations into

memory, the unit will automatically stop at each

station for five seconds so each can be heard.

When using the Automatically Store feature, the

new stations replace any stations already

stored in preset memory.

Preset Scan

Press the PS/AS button (17) to scan the six

preset stations in the AM band or all FM bands.

The unit will stop at each station for five

seconds before continuing to the next preset

station, and the preset number will flash on the

display during the preset scan. Press PS/AS

again to stop scanning and listen to the current

station.

SERIES

AF BUTTON(ALTERNATIVE FREQUENCIES)

When pressed short, AF switching button (18)

mode is selected.

When AF switching mode is selected, the radio

check the signal strength of the AF all the time.

When pressed long, it is activated as regional

mode ON/OFF.

- Regional mode ON:

AF Switching or PI SEEK is implemented to the

station which have all PI codes are same as

current station. REG segment is turned on, in

LCD display.

- Regional mode OFF:

The Regional code in the format of PI code is

ignored when AF switching or PI SEEK is

implemented.

Some broadcasting stations may change their

program from normal broadcasting to regional

broadcasting for a certain period. When regional

mode is off, the region identification in the PI

code is ignored; the radio may switch to a local

variant of the current program. When region

mode is on, the radio will only switch to a

program carrying the exact same PI code.

TA BUTTON(TRAFFIC ANNOUNCEMENT)

When pressed short, it is activated as TA

mode on or off

When TA mode is on and traffic announcement

is transmittude

- When the unit is in CD mode, it will switch to

radio mode temporarily.

- If the volume lever was under the threshold

point, it will be raised to the threshold point.

- When TP station is received, TP segment is

turned on in LCD display.

When pressed long, EON TA LOCAL /EON TA

DISTANCE mode is selected.

- EON TA LOCAL mode

When the field strength level of EON linked is

less than the threshold level. The radio does not

switch that station and user can hardly listen to

any disturbances. “EON TA LO “ is displayed a

few second.

- EON TA DISTANCE mode

EON TA switching is try to implemented by the

information of current station “EON TA DX” is

displayed a few second this mode is selected

button

(25)

Note: When AF switch is on, at this moment

use tuning up/down to search station will only

stop at station which has RDS broadcasting.

Note: When TA switch is on, at this moment

use tuning up/down to search station will only

stop at station which has TA broadcasting.

PTY Button

Each time when this button is pressed, the PTY

PTY Music Group -> PTY Speech Group ->PTY Off

button(15)mode will toggle in the following order:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jensen SD1413 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jensen SD1413 Manual

Product: