509308
28
Zoom out
Zoom in
Previous page
1/44
Next page
Amplificadores POWER
26
Localización de Problemas
NOTA: Si las luces de protección se activan sin altavoces conectados al
amplificador, y todas las conexiones de energía están bien, esto
indicaría un problema interno con el amplificador.
Problema Causa Acción Correctiva
No hay energía No llega energía a la
terminal +12V
Verifique fusibles
No llega energía a la
terminal REM
Verifique fusible(s) de la
unidad principal y el
cableado
Fusible quemado en la
batería
Reemplace el fusible e
identifique la causa del fallo
Fusible quemado en el
amplificador
Reemplace el fusible e
identifique la causa del fallo
Conexión a tierra
defectiva
Conecte nuevamente la
toma a tierra eléctrica
principal al metal
descubierto del chasis
Volumen demasiado
sensible
Control de nivel de
entrada demasiado alto
Reajuste el nivel de entrada
(refiérase a la página 8)
Sonido distorsionado Control de nivel de
entrada demasiado alto
Reajuste el nivel de entrada
(refiérase a la página 8)
Quema fusibles en el
amplificador
Cables de energía
conectados
incorrectamente
Conecte nuevamente y de
manera apropiada los
cables de energía
Problema interno con el
amplificador
Lleve la unidad al servicio
Ruido del motor /
Chirrido del
alternador
Toma a tierra en puntos
de diferente potencial de
voltaje
Utilice cables RCA con
protección de calidad
Toma a tierra defectuoso
en el amplificador
Tome a tierra nuevamente a
un chasis de metal
descubierto y limpio
Toma a tierra defectuoso
en la unidad principal
Tome a tierra nuevamente a
un chasis de metal
descubierto y limpio
Acoplamiento inductivo Reubique los cables lejos de
los arneses de fábrica
Nivel de entrada en el
amplificador configurado
demasiado alto
Ajuste nuevamente los
niveles de entrada (refiérase
a la página 8)
Protección termal
activada
Amplificador se
sobrecalienta con
frecuencia mientras
opera el altavoces de
graves
Se debe necesitar instalar
un ventilador para mantener
el amplificador fresco
Protección de corto
circuito activada
Altavoces quemados Verifique todos los altavoces
Cableado del altavoz que
pone en cortocircuito a la
tierra
Busque conexiones
Cruce defectuosa Cruce pasiva culpable
Protección de baja
impedancia activada
Amplificador conectado a
carga inadecuada
Verifique las conexiones del
altavoz
El amplificador no
operará una carga mono
de 1 ohm, mono mínimo
de 2 ohm
Verifique las conexiones del
altavoz
Altavoces defectuosos Verifique los altavoces
Cruzamientos pasivos
defectuosos
Verifique cableado
defectuoso
Respuesta de bajos
pobre
Altavoces fuera de fase Verifique la polaridad del
altavoz; revierta la conexión
a un altavoz solamente
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen POWER 400.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen POWER 400.2 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info