509306
12
Zoom out
Zoom in
Previous page
1/43
Next page
POWER
1500.50
5-Channel
Amplifier
Testing
Before finishing
the
installation, perform
the
following tests
to
make sure the
wiring
is
correct and everything
is
operating properly.
Reconnect Battery
When wiring
is
complete, reconnect
the
battery negative terminal.
Test Power Wiring
Turn on
the
receiver,
but
do
not
turn
up
the
volume. The amplifier power
light
should
comeon.lfnot,
check the
REM
and +12V
(B+)
wires. Turn
up
the
receiver volume slightly. All speakers should operate.
If
not, check wiring
connections
at
amplifier and speakers.
Test Speaker Connections
These tests make sure the speakers are connected properly.
If
speakers
don't
play
at
all, one (or both) speaker wires may be disconnected.
10
Remote
Input
Level
Control
The Power 1 500.50 comes equipped
with
a Remote
Input
Level Control. The
Remote
Input
Level Control allows the
input
level
to
be adjusted from an
alternate location.
It
can be mounted under-dash
or
in-dash. When the
amplifier
is
used
to
drive subwoofers and the
low
pass
crossover
is
activated,
the Remote
Input
Level Control can be used
as
a "remote
bass
level control".
This enables you
to
control
the
bass
level independent from the rest
of
the
system. This
is
convenient
for
system
tuning
and/or when playing many
different types
of
music.
The Remote
Input
Level Control
uses
a 3.5mm cable
for
connectivity.
Simply plug
the
3.5mm cable cable
into
the amplifier and then
into
the
Remote
Input
Level Control
to
activate
the
circuit.
.0
..
0
---;;;FRONT~
---;;;-REAR-;;;-
---;;;-SUB~
MIQAX
18HzQHz
MIQ
18HzQHz
MQ
30QHz
X-OVER X-OVER
n n
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen POWER 1500.50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen POWER 1500.50 in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info