509266

Jensen MP6612i Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
MP6612i
8
• LEVEL
Turn the rotary encoder clockwise to increase or counter-clockwise to
decrease the Bass level from “-6” to “+6”. “0” represents a flat response.
• Bass Center Frequency (C. FREQ)
Turn the rotary encoder clockwise to adjust the Bass Center Frequency
to 60, 80, 100 or 200Hz.
• Bass Quality Factor (BASS-Q)
Turn the rotary encoder to select one of the following Bass Quality
Factor options: 1N, 2N, 2W, 1W. The following chart depicts the curve
characteristics for each step:
Mid-Range (MID)
To adjust Mid-Range options, press the MENU button (22) three times or
until “MID” appears in the display. Press the TUNE/TRACK >>| or |<<
buttons (19) to access the following Mid-Range settings:
• LEVEL
Turn the rotary encoder clockwise to increase or counter-clockwise to
decrease the Mid-Range level from “-6” to “+6”. “0” represents a flat
response.
• Mid-Range Center Frequency (C.FREQ)
Turn the rotary encoder to adjust the Mid-Range Center Frequency to
500Hz, 1KHz, 1.5KHz, or 2.5KHz.
• Mid-Range Quality Factor (MID-Q)
Turn the rotary encoder to select one of the following Mid-Range
Quality Factor options: 1N, 2N, 2W, 1W. The following chart depicts the
curve characteristics for each step:
TREBLE
To adjust Treble options, press the MENU button (22) repeatedly until
“TREBLE” appears in the display. Press the TUNE/TRACK >>| or |<<
buttons (19) to access the following Treble settings:
• LEVEL
Turn the rotary encoder clockwise to increase or counter-clockwise to
decrease the Treble level from “-6” to “+6”. “0” represents a flat
response.
• Treble Center Frequency (C. FREQ)
Turn the rotary encoder clockwise to adjust the Treble Center
Frequency to 10KHz, 12.5KHz, 15KHz or 17.5KHz.
LOUD
When listening to music at low volume levels, this feature will boost the
bass and treble ranges to compensate for the characteristics of human
hearing. To adjust the Loudness settings, press the MENU button (22)
repeatedly until “LOUD” appears in the display. Press the TUNE/TRACK
>>| or |<< buttons (19) to access the following settings:
• LOUD
Turn the rotary encoder to turn the Loudness feature ON/OFF.
• LEVEL
Adjust gain to LOW, MID, or HIGH.
• Peak Frequency (P. FREQ)
Turn the rotary encoder to adjust the Peak Frequency to 400Hz, 800Hz,
or 2.4KHz.
• BOOST
Turn the rotary encoder to select “Flat” or “On” (Bass Boost).
Bass Quality Factor Curve Characteristics
Middle Quality Factor Curve Characteristics
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen MP6612i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen MP6612i in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info