509233
16
Zoom out
Zoom in
Previous page
1/48
Next page
16
Black Ground Wire
Connect the Black Ground wire to the vehicle body/chassis. Make sure that you
have a good chassis ground. Good ground connections will eliminate most
electrical noise from the motor and alternator. A good chassis ground requires
a tight connection to the vehicles metal chassis. The area around the ground
connection should be clean, bare metal without rust, paint, plastic, dust or dirt.
Red Accessory/Ignition Wire
Connect the Red Accessory/Ignition wire to a terminal coupled to the ignition
switchs ACC (accessory) position.
Note: If this unit is installed in a vehicle that does not have an ACC (accessory)
position on the ignition switch, the red lead of the unit should be connected to
a terminal coupled with ignition switch ON/O operations.
Yellow Memory Backup Wire
Connect the Yellow Memory Backup wire to an electrical terminal always supplied
with power regardless of ignition switch position.
Blue Remote Wire
Connect the Blue Remote wire to an Auto-antenna or power amp control wire/
remote connection. Maximum current 300Ma 12 V DC. (Low Current)
White Panel Light Wire
Connect the White Panel Light wire to the lighting circuit of vehicle. This will
illuminate the buttons on the display for night time operation. This wire can also
be connected to the Blue Remote wire to activate the buttons when the unit is
powered on. DO NOT JOIN THE WHITE WIRE TO THE LIGHTING CIRCUIT OF THE
VEHICLE IF CONNECTED TO THE BLUE REMOTE WIRE.
External Microphone Jack
You can connect an external microphone to the 3.5 mm microphone jack on the
back of unit. Install a microphone in your vehicle in an accessible location that
provides optimum voice reception.
RCA Output Jacks
The RCA Output Jacks are for connecting amplier, equalizer, or other audio
components that require a pre-amp out connection (Red = Right, White = Left).
Follow the manufacturers instructions for the audio component that you are
connecting.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen MP1516BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen MP1516BT in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info