509256
9
Zoom out
Zoom in
Previous page
1/24
Next page
MP1311
9
Display (D)
When the unit is off, the LCD displays the time
of day. When the unit is on, the LCD
automatically shows the tuner or CD display,
depending on which mode of operation is
currently activated.
Display Clock
During tuner or CD operation, press D (9) to
display the time of day. After five seconds, the
display reverts to tuner or CD display.
Set Clock
1. To set the clock, turn the radio on in tuner
mode (or any other mode).
2. Press D. The time appears on the display.
3. Press and hold D until the time display
begins flashing.
4. While the display is flashing, press the Up
Tuning button (14) to adjust hours and the
“A” (AM) or “P” (PM) indication. Press the
Down Tuning button (13) to adjust
minutes.
5. After five seconds, the time will set and the
display will return to tuner or CD display.
Auxiliary Input
Use the Aux In connector (19) to connect a
portable media device for playback through the
vehicle sound system.
Front Panel Release
The front panel release button (10) releases the
mechanism that holds the front panel to the
chassis.
Detaching the Front Panel
To detach the front panel, first press the front
panel release button (10) to release the left side
of the panel. Next, grasp the released side and
pull it off the chassis. After removing the front
panel, store it in the supplied carrying case to
protect it from dirt and damage.
Re-attaching the Front Panel
To re-attach the front panel, make sure the
electrical terminals on the back of the panel are
free of dust and dirt, as debris could cause
intermittent operation or other malfunctions.
Position the right side of the panel in place so
that it is correctly engaged, then lightly press
the left side of the panel until the mechanism
locks it into place.
Reset Button
The reset button (11) is located on the front of
the chassis and can only be accessed with the
front panel removed. The reset circuitry
protects the microprocessor circuitry. Since
resetting the unit will erase the time and preset
memories, it should only be activated upon
initial installation after all wiring is complete, or
if there is a malfunction of any of the switches
on the unit. In these circumstances, pressing
the reset button will clear the system and return
the unit to normal operation.
Theft Deterrent LED
A light-emitting diode (LED) (12) is located on
the chassis behind the front panel and will flash
when the panel is removed. The flashing light
serves as a visual warning to the would-be thief
that the unit has been disabled by removal of
the front panel.
1
2
/
T
U
N
E
CD1211 CD RECEIVER
S
C
A
N
M
O
N
O
E
Q
A
U
X
IN
REMOVE FRONT PANEL
RESET
12 11
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen MP1311 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen MP1311 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info