509198
8
Zoom out
Zoom in
Previous page
1/16
Next page
JHD910BT
6
Auxiliary Input Function
To connect a portable audio device (MP3 player, iPOD, etc.) to the JHD910BT, connect the
headphone or line level output of the device to the 1/8" auxiliary input jack of the JHD910BT (14)
using the audio patch cord (included). Press AUX (6) to select auxiliary input mode.
Timer
Press the TIMER button (8) to directly access timer mode. Press TIMER to start the timer
function. The “TIMER” icon will flash in the display. Press TIMER again to stop the timer. The
“TIMER” icon will remain in the display (without flashing). Press the button again to resume the
timer, or press and hold it for three seconds to reset it to zero and remove the “Timer” icon from
the display.
Volume
Press VOL+ (10) or VOL- (13) to adjust the volume up or down one step. Press and hold VOL+ or
VOL- for more than one second to continuously adjust the volume level until the button is
released. The current volume level (0 to 40) will appear in the display when the volume is
adjusted, returning to the default display three seconds after the adjustment is complete.
Setting the Clock
To set the clock to display the current time, press DISP (3) for more than three seconds to enter
clock setting mode. The time will flash in the display. Press TUN- (9) to adjust the hours or TUN+
(11) to adjust the minutes. When no adjustment is made for ten seconds, the time will be set and
normal operation will resume.
Audio Adjustment
Press AUDIO/MENU (12) to step through the following audio adjustment options: Bass, Treble
and Balance (left to right). When the desired option appears in the display, press VOL+ (10) or
VOL- (13) to adjust that audio feature. When no adjustments have been made for three seconds,
the unit will resume normal operation.
Menu Adjustment
Press AUDIO/MENU for more than three seconds to enter menu adjustment mode and adjust
any of the menu options: When the desired option appears in the display, press VOL+ or VOL- to
adjust that menu option. When no adjustments have been made for three seconds, the unit will
resume normal operation. The following menu options may be adjusted using this feature:
Beep Confirm (On or Off
) - Determines if a beep will be heard each time a button is pressed.
Operation Region (USA
or Euro) - Selects the appropriate operating region.
Clock Display (12
or 24) - Selects a 12-hour or 24-hour clock display.
Display Brightness (Low, Mid or High
) - Determines brightness level of the display.
Backlight Color (Amber
or Green) - Determines the backlight color of the unit.
P-VOL [Power on Volume] (On or Off
) - Determines if preset Turn On Volume will be set.
Turn On Volume (0-40) - Selects desired volume level for the unit to assume when turned
on.
WB Alert (On or Off
) - Determines if the weather band alert feature is activated.
BT ON - Enables Bluetooth connectivity.
BT PAIR - Connects Bluetooth device (see “Bluetooth Operation” on page 9 for detailed
instructions).
BT LIST - Show list of paired Bluetooth devices.
Default - Select to return to factory default settings.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen JHD910BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen JHD910BT in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info