509192
6
Zoom out
Zoom in
Previous page
1/10
Next page
JCD2010
6
BASIC OPERATION
Power On/Off ( )
Press the button (1) to turn the unit ON or OFF.
Volume Control
To change the volume level, rotate the VOL+/- control (4). When the volume is adjusted, the
volume level is shown on the display panel as a number ranging from 00 (lowest) to 63
(highest).
Mute
Press the MUTE button (8) on the control panel to mute the audio output. Press MUTE again to
restore the audio output to the previous level.
Mode
Press the MODE button (5) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include Radio, CD, and AUX (optional
Auxiliary Input).
Auxiliary Input
To connect a portable audio device, insert a standard 3.5mm (audio line output or headphone
output from your portable CD/MP3/iPod or other media player) into the front "AUX IN" jack.
Press the MODE button (5) to change to AUX mode. Press MODE again to cancel AUX mode
and return to previous mode.
Audio Menu
Press the VOL+/- control (4) on the control panel to access the Audio Menu. You can navigate
through the Audio Menu items by pressing the volume control button repeatedly. Once the
desired menu item appears on the display, adjust that option by turning the volume control
knob within 5 seconds. The unit will automatically exit the Audio Menu after five seconds of
inactivity. The following menu items can be adjusted.
Volume Level
Use the button to adjust the Volume level from “00” (lowest) to “63” (highest).
Bass Level
Use the button to adjust the Bass (BA) level range from “-7” to “7”.
Treble Level
Use the button to adjust the Treble (TR) level range from “-7” to “7”.
Balance
Use the button to adjust the Balance (BL) between the right and left speakers from “9L” (full
left) to “9R” (full right). “BL:0” represents an equal balance between the right and left speakers.
Fader
Use the button to adjust the Fader (Fd) between the rear and front speakers from “9R” (full
rear) to “9F” (full front). “Fd:0” represents an equal balance between the front and rear
speakers.
Clock Set
In clock display mode, press VOL+/- (PUSH SEL) control (4) for 2 seconds to enter clock
adjustment mode.
While the hour is flashing, rotate the VOL+/- control (4) to adjust the value as follows:
USA Tuning Mode: 1-12
EURO Tuning Mode: 00 - 23
Press the VOL+/- control to confirm the hours.
While the minutes are flashing, rotate the volume control to change the value
(from 00 to 59).
Press the VOL+/- control for 2 seconds to confirm the time and exit clock adjustment
mode.
Reset
Use a pencil or any non-metallic object to press and hold the RESET button (17) for five
seconds to reset the main unit. The unit will return to the factory default settings. The reset
button should be activated for the following reasons:
initial installation of the unit when all wiring is completed
function buttons do not operate
error symbol on the display
Preset Equalizer (EQ/LD)
Press the EQ/LD button (15) to select from the following preset equalizer functions: CLAS
(classic) > ROC (rock) > POP > DSP (OFF). When “DSP” is selected, the EQ function is
controlled by the user bass/treble settings.
Loudness (EQ/LD)
Press and hold the EQ/LD button (15) to toggle loudness on/off. When listening to music at low
volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.
1
4
6
5
2
3
8
10
16
9
11
12
13
14
21
15
20
19
18
7
17
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen JCD2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen JCD2010 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info