509254
17
Zoom out
Zoom in
Previous page
1/32
Next page
13
HD5212
Satellite Radio Operation
Listeners can subscribe to XM® Radio on the Web by visiting
www.xmradio.com, or by calling (800) 967-2346. Customers should
have their Radio ID ready (see “Displaying the Identification (ID)
Code”). Customers can receive a limited number of free-to-air
channels without activation.
Listeners can subscribe to Sirius® Radio on the Web by visiting
www.sirius.com, or by calling (888) 539-SIRIUS. Customers should
have their Sirius ID ready (Sirius ID is located on the Satellite Radio
Tuner, sold separately). Customers can listen to music samples by
tuning to channel 184.
Accessing Satellite
Radio Mode
To switch to satellite radio mode, press the SRC button (2) until “XM
RADIO” or “SIRIUS” appears on the display. This will not be displayed
unless the unit is connected an optional Sirius or XM receiver.
Displaying the Identification (ID) Code
Before you listen to satellite radio, you must subscribe to the service using
your radio’s identification number. To display the radio ID, press the TUNE/
CH << button (11) to access channel 000. The screen displays the radio ID
where the channel name is usually displayed.
Selecting a Station
Press the TUNE/CH >> or TUNE/CH << button (10 and 11) to change to
another station. Press and hold the TUNE/CH >> or TUNE/CH << button for
more than one second to fast forward or fast reverse through the stations.
Preset Stations
Press the BAND button (3) to change between three user preset channel
groups. Each channel group stores up to six preset stations. You can store
and recall a total of 18 preset stations.
Store a Station
1. Select a channel group, then select a station.
2. Hold a preset button (13 – 18) for three seconds. The preset number
appears in the display.
Recall a Station
1. Select a channel group.
2. Press a preset button (13 – 18) to select the corresponding stored
station.
Tuner Modes
Press the DISP button (7) to change the tuner mode to the following options
in the order listed.
Channel Name
Genre (News, Sports, Hits, Kids, etc.)
Artist name
Song Name
If the selected channel name, artist, or title exceeds eleven characters, the
display information will scroll twice upon selection.
Direct Tuning Mode
To enter a station directly, perform the following steps.
1. Press the SELECT button (5) to enter direct tuning mode.
2. Turn the rotary encoder to display “XM CH_ _ _” or “SR CH_ _ _”.
3. Turn the rotary encoder again to select the first digit of the desired
channel (0, 1, or 2).
4. Press the BAND/ENTER button (3) to enter the first number and move
to the second position.
5. Turn the rotary encoder again to select the second digit of the desired
channel (0 - 9).
PRESS
RPT SHFSCN
1
2
3 4
5
6
SEL
CAT/DIR
AUX IN
MONO DISP
EQ
BAND
SRC
TUNE/CH
MUTE
A~Z
0~9
PS
ENTER
IPOD
FILE/FOLDER
HD5212
SAT
READY
1
2
4
7
10
11
3
5
6
8
9
20
12
19 21
13 14 16
15
17
18
22
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen HD5212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen HD5212 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info