509247
13
Zoom out
Zoom in
Previous page
1/20
Next page
CD3720XM
13
XM
®
Radio Operation (continued)
Preset Stations
Press BND/LOU (19) to change between three XM
®
Radio bands. Each band stores up to six
preset stations. You can store and recall a total of 18 preset stations.
Store a Station
1. Select a band (if needed), then select a station.
2. Hold a preset button (8 – 13) for three seconds. The preset number appears in the
display.
Recall a Station
1. Select a band (if needed).
2. Press a preset button (8 – 13) to select the corresponding stored station.
Preset Scan
1. Press AS/PS (14) for < 3 seconds. The unit pauses for 5 seconds at each preset station
for all three bands (XM-1, XM-2, and XM-3).
2. Press AS/PS again to stop scanning when the desired station is reached.
Operation de la Radio XM
®
(continuado)
Preselección de Emisoras
Pulse BND/LOU (19) para sintonizar la radio entre las tres bandas XM
®
. Cada venda
almacena hasta seis estaciones preestablecidas. Usted puede almacenar y recordar un total
de 18 estaciones preestablecidas.
Cómo Almacenar una Emisora
1. Seleccione una banda (si fuera necesario), y seleccione una emisora.
2. Mantenga pulsado durante tres segundos un botón de preselección (8 – 13). El número
programado aparecerá en la pantalla.
Cómo llamar una Emisora
1. Seleccione una banda, (si fuera necesario).
2. Pulse un botón de preselección (8 – 13) para seleccionar una emisora almacenada
previamente.
Preselección Mediante Escáner
1. Pulse el botón AS/PS (14) por menos de 3 segundos. La radio hará una pausa de 5
segundos en cada emisora que encuentre para las tres vendas (XM-1, XM-2, y XM-3).
2. Pulse AS/PS (14) nuevamente para que el escáner se detenga cuando haya encontrado
la emisora deseada.
Fonctionnement de la Radio XM
®
(continué)
Des Stations Préréglées
Appuyez sur BND/LOU (19) pour changer entre trois bandes de la radio XM
®
. Chaque bande
garde en mémoire jusqu'à six stations préréglées. Vous pouvez mettre en mémoire et rappeler
un total de 18 stations préréglées.
Mettre une Station en Mémoire
1. Sélectionnez une bande (si nécessaire) et puis sélectionnez une station.
2. Appuyez sur un bouton de préréglage (8-13) pendant trois secondes. Le numéro préréglé
s'affichera.
Rappeler une Station
1. Sélectionnez une bande (si nécessaire).
2. Appuyez sur un bouton préréglé (8-13) pour sélectionner la station sauvegardée
correspondante.
Balayage Préréglé
1. Appuyez sur AS/PS (14) pendant trois secondes. La machine s'arrête pendant 5
secondes à chaque station préréglée pour toutes les trois bandes (XM-1, XM-2 et XM-3).
2. Appuyez de nouveau sur AS/PS pour arrêter le balayage lorsque la station désirée a été
atteinte.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen CD3720XM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen CD3720XM in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info