509239

Jensen CD1213 Manual

8
Zoom out
Zoom in
Previous page
1/46
Next page
CD1213
6
NOTE: The Scan function does not work
correctly in “MANUAL” mode.
Preset Stations
Up to six stations on each band can be stored
as presets and can then be instantly recalled by
pressing the associated preset button on the
front panel (19-24) or remote control. To store a
station, turn the radio on and select the desired
band and station. Press and hold the desired
preset button (numbered one through six on the
face of the radio or remote control) for more
than two seconds. When stored, the preset
number will appear in the display. The station is
now stored and can be recalled at any time by
pressing the corresponding preset button.
Repeat for the remaining five presets on the
current band and for all presets on the other
three bands.
Preset Scan / Automatically
Store (PS/AS)
Automatically Store
Select six strong stations and store them for all
bands using the Automatic Store feature. To
enable this feature, press and hold the PS/AS
button (17) for more than two seconds. The
radio will automatically scan each band and
enter strong stations into the preset memory
positions. After entering the stations into
memory, the unit will automatically stop at each
station for five seconds so each can be heard.
When using the Automatically Store feature, the
new stations replace any stations already
stored in preset memory.
Preset Scan
Press the PS/AS button (17) to scan the six
preset stations in the AM band or all FM bands.
The unit will stop at each station for five
seconds before continuing to the next preset
station, and the preset number will flash on the
display during the preset scan. Press PS/AS
again to stop scanning and listen to the current
station.
Mono/Stereo Selector (MONO)
Press MONO (18) during FM radio operation to
select mono reception of the broadcast signal.
Under normal reception, the unit should be left
in the stereo mode, as indicated by the “ST”
designation that appears on the display panel
when tuned to an FM stereo signal. If the signal
is too noisy for comfortable listening, press
MONO to switch to mono reception. The “ST”
indication will disappear. Press MONO again to
return to stereo mode.
Local / Distance Selector
This feature is used to designate the strength of
the signals at which the radio will stop during
automatic tuning. Distant, or “Dx” is the default
setting, allowing the radio to stop at a broader
range of signals. To set the unit to select only
strong local stations during automatic tuning,
press the LO/DX button (25). The “LOC” icon
appears in the display when LOCAL reception
mode is selected.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen CD1213 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen CD1213 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info