509236
25
Zoom out
Zoom in
Previous page
1/32
Next page
BT1611i
25
NOTE: When a call comes in during stand-
by mode (ignition on/power off), the head
unit will turn on automatically so you can
accept/reject the call.
NOTE: When a call comes in during talking
mode, the OPEN/EJECT button (31)
becomes deactivated.
Answering an Incoming Call
To answer the incoming call, press the AUDIO
CONTROL (DIAL) button (3).
NOTE: During an incoming call, the audio
output is muted and a ringtone is played. CD
play is paused.
Use the AUDIO CONTROL (3) to adjust the
volume during your phone conversation. During
an active call, the LCD will display “Phone
>>>>” followed by the the elapsed call time.
To end the conversation, press the B (CLEAR)
button (5).
Rejecting an Incoming Call
Press the B (Clear) button (5) to reject an
incoming call.
Making an Outgoing Call
1. Press the AUDIO CONTROL button (4) to
begin an outgoing call. The LCD will dis-
play and a cursor will
blink while waiting for the phone number
entry.
2. Turn the AUDIO CONTROL to select 0-9,
*, and # to input the phone number,
pressing the AUDIO CONTROL to confirm
each selection. Press the B (CLEAR)
button (5) to clear the last digit, or use the
Up Tuning (14) or Down Tuning (13)
buttons to move the cursor back or
forward to the incorrect input digit and then
press B.
3. After entering the phone number, press
and hold the AUDIO CONTROL or press
the MODE button (2) to dial the call.
NOTE: The audio output will only be muted
after the PHONE button is pressed to dial
the outgoing call.
NOTE: During an outgoing call or during
talking mode, the OPEN/EJECT button (31)
becomes deactivated.
Use the AUDIO CONTROL (3) to adjust the
volume during your phone conversation. To end
the conversation, press the B (CLEAR) button
(5).
If the ignition is turned off during a call, the unit
will remain on, allowing you to complete the
call, until you press the B (CLEAR) button to
turn the unit off. The unit will continue to
operate on battery power until it is turned
off.
Call Transfer
While talking, to transfer audio from the head
unit back to the mobile phone, press the MODE
(Transfer) button (2). The LCD will display
for 3 seconds.
When making an outgoing call, it's not
possible to transfer the call if it is not yet
answered. You can only transfer a call
after it has been answered.
The time it takes to transfer the call back
to the phone will vary depending on your
phone model.
NOTE: The BT1611i can only handle one call
at a time, two lines cannot be active at one
time even if your phone has call waiting.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jensen BT1611i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jensen BT1611i in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info